Hi everybody it’s Jenny from the MSQC. And I’ve just got such a great project for you
today. I love what happens when you take an ordinary little tumbler block and you put
some sashing on it. And all of a sudden it’s got some pop and pizzazz. So let’s look
at this quilt. Isn’t this fun? I love how it’s lined up. I love what happens when
we put the sashing around it and in between it. It just really makes a fun project. And
this goes together so fast. So what you’re going to need to make this quilt is you’re
going to need three packs of five inch squares. So that’s 120 squares. And you’re going
to need about 2 ¼ yards of black fabric, your background fabric, whatever color you
want your sashing to be. Most of that is going to get cut into 1 ½ inch strips. So if you
wanted to use a roll up of 1 ½ inch sashing strips you could do that as well. You will
need a little bit of it bigger because we put some half, half of our tumbler blocks
out here along the side to make the quilt have the appearance of kind of floating on
the quilt. So it makes it look really cool. So then you’re also going to need a yard
and a quarter for your border. This is a five inch border that just sets everything together
really nice.
So let me show you how to make this. First you’re going to need your tumbler template.
And we’re going to take that template and we are going to lay it right on the square.
Now our templates are made for the pre cuts and so you have very little waste. It goes
top to bottom, side to side. And then all you’re doing is trimming off this little
bit out here. So we’re going to trim these off. We’re going to do this to the whole
pack. So you’re going to have a whole stack of tumblers just like this.
Then what you’re going to do is you’re going to divide your stack in half. Because
how we put these together, how we sash these is going to make this quilt go together very
fast. So I”m going to roughly take half of this stack. You’ll want to count yours
to make sure you have half. I’m going to take a 1 ½ inch black strip right here. And
we’re going to sew half of our tumblers. We’re going to put the sashing all on the
left side. The other half we’re going to put the sashing all on the right side, like
this. Ok so just make sure that when you put your sashings together you have half on your
left side and half on your right side. So I”m going to come over to the sewing machine
and we are going to, I’m just going to show you how I chain piece these on.
And we’re just going to go ahead and add them along here. And you leave, make sure
that you leave a little space in between because as we press these out you want to trim them
and you’re going to want to have, you’re going to want to have enough space because
there’s a little bit of an angle there, you’re going to want to have enough space
to cut. So we’re going to lay these on here and just sew a quarter of an inch. Alright
so now what we’re going to do is we want to iron these open before we cut them because
we want to make sure that our angle is right. So I’m going to set that seam, roll that
back and make sure there’s no folds or pleats. And just roll that back. Set it and roll it,
just like this.
Alright so now you need to trim them and any little straight edge will do. I’m going
to use my little ruler here. And what I’m going to do is I’m going to lay my ruler
and I’m going to match it up to the top of the top of the tumbler template. And I’m
going to, as I come across this strip right here it’s going to make, it should line
up exactly. So right here, see this whole template lines up and we just keep that line
going and trim that off there. And it should just match up perfectly. So we’ll do the
same thing down here, line it up, don’t make it, you don’t want to push it so it’s
going the wrong direction. But line your ruler up with the top of your template and then
just trim them all. And it’s better to have a little bit of space in there. I guess I
didn’t need quite as much as I thought. But that’s alright. Better to be safe than
sorry. Alright so what you’re going to do is you’re going to have a whole stack of
these where all of your sashing is on the lefthand side. And then you’re going to
have a whole stack where all of your sashing is on the righthand side. And you can see
I’ve got some of those ready to go right here.
So what we’re going to do now is we’re going to sew these together in rows. And because
when we go to sew a tumbler together, you can’t just sew it like this, you have to
flip these over. And then you can see when we flip them they line up perfectly. So when
you go to sew these together you’re going to lay these on here. You’re going to match
it as close as you can edge to edge and just sew a quarter of an inch and we will go do
that. There we go. And you’re going to do that to your whole row. So you’re going
to make a whole row of these. And there are ten in every row, 12 rows. You’ll see they
start beginning like rows and you’ll be able to add to them. So when you get ready
to put your next piece, you’ll see that this doesn’t work. And it automatically
will fit and go this way. And you’ll be able to just put them together and put them
in long rows. Now there are ten in each row. And when you get your row together, you can
see on this one that we’ve straightened that out.
And how we did that was we took the end of our row, let’s say this is the end of our
row. We took a, excuse me, we took a five inch square that we cut into our tumbler right
like this. Here’s our tumbler square. We cut it right in half. When we add that to
the end of our row like this, it’s going to make that edge straight like this. All
of a sudden that edge becomes straight and then you can just add your border on it. So
right up here you’ll see all of these come in and you see how these edges are straight
and we can add the border to it. We went ahead and put a straight little 1 ½ inch border
across the top and in between every row. So here’s a row right here and we’ve got
our next row right here ready to add. And you’re just going to kind of stack these
on top of each other like this. And you’ll put your little inch and a half piece in between
right here. And it just finishes it off and makes it look so cool. You’ll put one across
the top, one across the bottom. Your sides will already have your little border piece
with your hexi on it. You don’t need to add a 1 ½ strip there just on your border
and you are good to go. And this project goes together so fast. Because we’re sewing half
of them on this way and half of them on them that way and when we put them together because
your little sashing is already done it goes together so quickly. So we hope your enjoyed
this tutorial on the Sashed Tumbler from the MSQC.