It's finally here. What do you think skosh?
Yes, Quest Crew is here. Let's run upstairs and unbox it. All right Tada,
there we go, oh, ooh. So they give you a little pull tab here. So if I just pull it,
that's nice. And then it just kind of slides out. Let's open it up
inside the lid here, there's a looks like a cover
or the lens. So we have each controller. And then these controllers, you notice don't have
the little sensor over the top. So if we compare it with the Oculus, or the metta quest two sensor,
they look almost exactly the same except these, the new ones and the pro have cameras. So there's
1234 cameras around the side. And then there's no tracking loop because the cameras actually
track for it. So it's basically like a little mini headset, so it's not displaying so it has its own
tracking data, which is nice, instead of having to be tracked via the cameras in the headset. Also,
there is a little looks like a charging port here on the side. So we'll see how
that's supposed to work as well. I'm gonna go ahead and take off the stickiness.
And it says to hold power for two seconds, I guess that's how you turn it on.
And then the other one, identical, and then the headset
There we go. That's super nice. So this one doesn't have the top strap here.
But it kind of cuts your head a little bit better. It looks like
we've got some directions here. Pull that off. So it says to start looks
like you have to hold down both of the buttons in your controllers. And then there's a button
right there that turns on the headset, they have to hold down. Oh, that's cool. So instead
of having the buttons on the bottom, so you can do a little comparison here. And so on the quest two
you've got the your volume buttons here. And then on the side you've got the power button, and then
a USB cable and a ox 3.5 millimeter jack in the quest there. With the Pro, you've got buttons. So
this is your power button here on that side. And then you've got your plus and minus buttons there.
And then we've got the pancake lenses. Now instead of the fresnel lenses,
you can kind of notice the difference there. Do you notice the Fresnel has the kind of rings and
then this these are flat. So I'm excited to see how the difference is there. And then the OS the
row also has some facial tracking. So there should be some cameras inside of here to track your eyes,
and then some sensors and cameras down below to track your facial movements. And then we've got
the color pass through sensor there. And then the other two are just spatial sensors and tracking.
And then you've got some sensors here on the side as well. And it looks like you've got all these
little mounts here and that's for charging, which is gonna be super nice or stickies to pull off
and then there's still some stuff for us to take out here. So we've got this little box here with
all the cables. So this comes with a little dongle to go on the outlet. Got some cables
here so just USB C cable and then this looks like a charging cable. Yep, it's magnetic too. So
very similar to how the Mac PCs do it. Just kind of a magnetic charger there so you got
slowest looks like one and then one, just a regular USB C charger.
All right. Let's continue on, we've got the instruction manual, and a little cleaning
rag that's super nice, does not look like it. Oops, stylus tips. Ah, I would have missed this.
So these are little tips that go on to the end of the controllers, I believe they go on down
here at the bottom. I'm not quite sure how they go on, but they are for drawing. So you put these on
down here at the bottom, and then you can draw, you know, by using the end of your controller
there. Tuckson right there. Interesting. There's a very small instruction manual.
Safety Manual. Then underneath this little hood here, we've got the charger, got charging plate,
or the headset and the controllers. And then this also comes with the the ice seal. So these are
to cover your eyes there. So you don't have any extra light leaking through. Alright, so this
is everything we get in the box. We start with our Oculus quest medic quest Pro, I'm gonna say Oculus
forever, meta quest Pro. And it comes with a cover that goes over the top here, which is pretty nice,
especially since this is like an all glass front and very prone to fingertips. It looks
like fingerprints. It also comes with two little side hoods here that are magnetic, which is nice.
So these just kind of stick on there. Okay, I've got the wrong side. That was very good. Oh,
no, that's wrong. All right, it was right there. And it's magnetic. There we go. These little side,
almost like blinders for a horse. One like that, they just kind of clip in. And then
that blocks all here the extra light coming in. And then we also have a little magnetic
charging port looks like so you can drop the headset on there. And then
what so both the controllers can also go on it looks like so I have to finagle them
correctly. There we go. So that's the whole charging package. That's super nice in and
that plugs in with just this USBC cable here on the side. So that's the unboxing Be on the
lookout for a first impressions video that's going to be coming up very soon. If you are
interested in getting into VR development at all, I encourage you to take the quiz that's down in
the description of this video. It'll give you a gauge on, you know how much you have to learn to
get into VR development and maybe some next steps to jump into that. So I look forward to seeing you
in the next video. Whoa, whoa, whoa, whoa, whoa, I can't believe you're about to click off the video
without liking it first. Come on. Help a brother out. All right, I'll see you in the next one.