Hi everyone, Welcome back to geardo,
Today we will show you how to teardown or disassemble the Samsung Galaxy A53
5G Mobile phone for repairs. To start, we need to have the
right tools to proceed with the teardown, which You can find in the description.
First, turn off the phone and follows with the back cover removal.
To remove the back cover, it needs to heat gently
around the rear cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on the pad
and Select the mobile phone HEATING option and leave it till it completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Take out the rear cover and take out the Main Board protector frame by undoing eight screws.
And
Next, from the left-hand side, disconnect the battery plug.
Next, disconnect the main flex from the board.
Next, take out the battery. Here, we are using isopropyl alcohol to soften the battery adhesive.
Otherwise, use a heat gun to release the battery glue.
And then, use a plastic card pry tool or something similar to cut the adhesive.
Be gentle in this process and pull out the battery using a pry tool.
Next, disconnect and take out the front camera from the board.
Next, disconnect and pull out the macro and depth camera from the board.
Next, for pulling out the logic board, Undo one more screw on the logic board,
And then undo two antenna heads from the board.
And
next, using a pry tool, pull out the logic board by relaxing both cameras.
Next, disconnect the Main and ultrawide camera connectors from the rear side of the logic board.
Next, apply little heat and take out the vibrator motor.
Next, add some heat and pull out the earpiece module.
Next, apply some heat to release the button flex from the frame.
Gently pull out the cable with the bracket.
Next, Move to the Bottom and undo seven screws to take out the speaker cover.
Next, disconnect and take out the main ribbon cable.
Next, disconnect and take out the Touch ID sensor camera.
If needed, add some heat to release the camera.
Next, eject the sim tray.
Next, peel the antenna cables from the frame
and take out the charging port board by relaxing the lcd cable.
Hope you have enjoyed the teardown guide.
Let us know if you have any questions; please like, share, and comment on our videos.
DO not forget to hit the subscribe button.