Hello friends
In this short video
I guide you to combine two internet connections to increase speed
Currently mikrotik router has been configured as above,
including pppoe client, nat, dhcp server, default route,
ip address gateway
In this part we will create various mangle rules that will help to mark connection and routing and pass different network traffics to different WAN connections
On General tab,
Choose prerouting from Chain and choose LAN from In. Interface and then choose no-mark from Connection Mark
on Advanced tab, choose both addresses and ports from Per Connection Classifier
and put 2 in next 1st input field and 0 in 2nd input field
On Extra tab,
click on Dst. Address Type option and choose local from Address Type and then click on Invert checkbox
On Action tab and choose mark connection from Action and put LAN to WAN1 in New Connection Mark
On General tab, Choose prerouting from Chain
and choose LAN from In. Interface and then choose LAN to WAN1 from Connection Mark
On Action tab and choose mark routing from Action and put WAN1 Route in New Connection Mark
On General tab
Choose prerouting from Chain and choose LAN from In. Interface and then choose no-mark from Connection Mark
on Advanced tab,
choose both addresses and ports from Per Connection Classifier and put 2 in next 1st input field
and 1 in 2nd input field
On Extra tab,
click on Dst. Address Type option and choose local from Address Type
and then click on Invert checkbox
On Action tab and choose mark connection from Action and put LAN to WAN2 in New Connection Mark
On General tab
Choose prerouting from Chain
and choose LAN from In. Interface and then choose LAN to WAN2 from Connection Mark
On Action tab and choose mark routing from Action and put WAN2 Route in New Connection Mark
On General tab
Choose prerouting from Chain and choose pppoe out 1 from In. Interface
and then choose no-mark from Connection Mark
On Action tab and choose mark connection from Action
and put WAN1 Conn in New Connection Mark
On General tab, Choose output from Chain and choose WAN1 Conn from Connection Mark
On Action tab and choose mark connection from Action and put LAN to WAN1 in New Connection Mark
On General tab
Choose prerouting from Chain and choose pppoe out 2 from In. Interface
and then choose no-mark from Connection Mark
On Action tab and choose mark connection from Action and put WAN2 Conn in New Connection Mark
On General tab, Choose output from Chain and choose WAN2 Conn from Connection Mark
On Action tab and choose mark connection from Action and put LAN to WAN2 in New Connection Mark
Now we will configure policy based routing
so that marked packet can be routed properly through appropriate WAN connection
Put pppoe out 1 in Gateway
Choose ping from Check Gateway. Put 1 in Distance input field
Choose WAN1 Route from Routing Mark
Put pppoe out 2 in Gateway, Choose ping from Check Gateway
Put 1 in Distance input field
Choose WAN2 Route from Routing Mark
Thus I have configured to combine two pppoe links together
If this helps, don't forget to leave a like and more, subscribe to my YouTube channel for more helpful videos