ok today what we're going to do is we're going to show you how to put a what they
call Ropin windshield into a volkswagen rabbit convertible first thing you want
to do is going to start off with the seal obviously the seal you can see
there's actually a groove in the front of it for putting the chrome press and
shrimp that's gonna obviously go towards the front of the front of the car and
you want something you need actually if you're gonna need this soap and water
and use that to actually blue bastille and that's going to evaporate eventually
but this helps with getting ceiling so we're going to do is just show you how
to put the c1 and go from there
alright so we're going to actually put the seal on now first thing you want to
look at his sister's a little seam where they make the seal actually right here
and basically what you want to do is match that up right over the center line
of the windshield so we're just going to start with the corners and wrap this
around fit on the windshield
ok
yeah
ok
yeah
I just want to flip it up and just take a look at it because the scene is about
where you want it
I'm right there in the center and make sure that all the seal is seated on the
windshield correctly there you go any further
all right next to you want to do is you want to take the soup solution we talked
about and we're gonna have to use that to help install the chrome trim so you
want to just kind of squeeze it in their little group
why is it important to install the chrome trim first Murray basically when
you install the windshield the little groove for this for the chrome can
actually compressed and suck the windshield into the frame so it's gonna
be nearly impossible to get that chrome trim in its gonna be released very
difficult you need damage to your fresh grown so I want to put this in first
it's a race that seem that we talked about here at the scene you're gonna
want to just start there and work your way around so kind of just pops into the
grief
let's take a little bit of work to get in there just great
yeah
but as you may be able to see it's much easier with the with the soapy water
just helps to give it that little bit of lubrication fit into the groove just
right
yeah
ok
yeah
you've got to trim pretty much installed what you're going to want to do then
it's just take a knife or some scissors cut a little end here and there's
actually a little clip it's going to go over top of it over the seal so it's
going to cover right where your joint is so we're just going to cut that up
yeah
now what you're going to do is it's a little quip that actually goes in
between the the joint just to make it a nice seamless chrome piece so just going
to slide that on the one hand
we got that mountain
much good to go I was gonna take the seal and make sure it's all seated on
again