Hi everyone, welcome to HowFixit. In this video guide,
I gonna show you how to replace the fan on the DJI Mavic Air 2 drone.
This will help fix the aircraft processor chip overheating error. Also, You can find
links to step-by-step video instructions for repairing other drone models in the description.
To disassemble DJI Mavic Air 2 drone you'll need the following tools:
Screwdriver set with Phillips 1 and Hex 1.5 screwdriver
Plastic pry tools Tweezers
The drone is a complex device that has many screws and parts.
In the process of disassembling your DJI Mavic Air 2 drone, I recommend keeping track of each
screw and part step by step, this will help to reassemble your Mavic Air 2 drone successfully.
And don't worry about losing any of the screws, all of them will definitely
remain on the magnetic mat. In the description, I left links where to buy all the necessary tools.
Before you start, remove the battery.
Be careful with the thermal compound, it will be reused when reassembling the drone.
The aircraft processor chip overheating code 30135 is most likely caused by a broken fan.
In the description, I left a link where to buy a fan for your DJI Mavic Air 2 drone.
Let's start reassembling the Mavic Air 2 drone.
If you don't have a thermal compound, use the paste from the old fan.
The drone is assembled, and now you can check it. I really appreciate you watching my video guides,
you can ask all additional questions regarding the repair in the comments.
Thanks for watching and have a safe flight.