What’s up guys, welcome back to the Tenorshare channel.
When you try to sign out of your Apple ID from the iPhone or iPad,
you might see a prompt like this.
Saying that there was an error connecting to the Apple ID server.
Sometimes it says Sign out is not available due to restrictions.
Or the wheel is spinning forever and the sign out button greyed out.
No worries, in this video, I’ll explain how to fix it very easily.
Let’s dive in!
If the sign out is not available due to restrictions,
all you have to do is go to Screen Time in settings,
then go ahead and turn it off.
You can turn it back on once signing out.
Ok, let’s check it out.
See, the sign out button is working now.
If you forgot your Screen Time passcode,
try removing it with 4uKey on a Computer.
which can get it done in about 2 minutes.
If you are seeing the spinning wheel or the error pop-up,
here is how to check your network status.
Make sure you have connected to Wi-Fi or cellular network,
Open safari, check if you can visit apple.com smoothly.
If not, try another Wi-Fi as a change.
Next, go to Apps using WLAN or Mobile Data,
and make sure you have granted Settings to use network.
A more powerful way to fix the network issue is to reset network settings,
In general, scroll down, tap transfer or reset iPhone,
Then go ahead and reset network settings.
Once done, reconnect to your network and try again.
If your network is fine but the issue persists,
open safari,
and go to the apple system status page.
Check if service for Apple account and find my is available at the moment.
If not, we’d better try again later.
Sometimes a wrong date and time can cause some glitches,
so it’s recommended to let your iPhone set it automatically.
To make all these changes take full effect, let’s give the phone a fresh restart.
For iPhone 8 or later,
press and quickly release the volume up button,
press and quickly release the volume down button,
then press and hold the side button,
let it go when you see the apple logo.
If the sign out is still not working or you forgot your Apple ID password,
here is how to remove it using 4uKey on a computer.
Once plug your phone in,
go to the Unlock Apple ID section,
click start remove to proceed.
Here confirm you have set up a lock screen passcode.
If not, set one up from scratch.
Then confirm you have enabled Two-Factor Authentication.
Once downloaded the firmware, you can start removing.
This process takes about 10 minutes.
Once completed, follow the instructions here to set up your iPhone.
When got to the iPhone Lock To Owner screen,
tap Unlock with Passcode to continue.
See, the Apple ID has been signed out of the iPhone.
So that’s it.
Thanks for watching.
For more tips like this, subscribe to the Tenorshare channel,
or click another video to keep watching now.
See you next time.