Hi everyone, Welcome back to geardo,
Today we will show you how to replace the battery on the google pixel 4xl mobile phone.
To start, we need to have the right tools to proceed with the repair,
which You can find in the description.
First, turn off the phone and follow the back cover removal.
For this, we are using a heating pad. Place the back cover side on
the heating pad and Select the mobile phone HEATING option and leave it till
it completes. Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
While removing the back cover, be gentle. The flash sensor plug connects with the back cover.
Next, take out the bracket by undoing four screws to undo the battery plug.
Next, take out the sensor bracket by undoing two screws.
Please note one screw is missing on our device.
And then disconnect the plug to release the back cover from the body.
Next, take out the not-working pixel 4 XL battery from the body.
First, apply little to soften the glue on the battery. For this, we are using a heat gun.
Once you feel the heating is enough, use a pry tool to cut the adhesive under the battery.
Next, Place the new Pixel 4xl battery on the body with adhesive.
Next, connect the bak cover sensor flex to the board and place the bracket by
adding two screws. Once again, our device has one screw, but yours should have two.
Next, secure the battery plug and place the bracket by adding four screws.
Next, Before installing the main back cover, make sure it has enough glue on it;
if not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding bonding clips to tighten the rear cover with the body.
If not, you can use some rubber bands and Leave them for some time.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions. Please, like, share, and comment on our videos.
DO not forget to hit the subscribe button.