This video will give detailed information about the buttons built into DJI RSC 2
As well as how to access the most frequently used shooting modes quickly
The following is an introduction on the button functions of DJI RSC 2
Power Button Press and hold to power on or off
Press twice to enter or exit sleep mode
Back Button Press to exit the current screen
Side Dial Press to enter the menu, and turn to scroll the options
Joystick Toggle to control the movement of the gimbal
M Button Press to select a user profile
Camera Control Button
After connecting the gimbal and camera via a Multi-Camera Control Cable
Press halfway to autofocus, press once to start or stop recording, or press and hold to take a photo
Trigger
Press once to start ActiveTrack
Tap twice to recenter the gimbal
Tap three times to turn the gimbal 180° and enter selfie mode
Front Dial
The default function of the front dial on DJI RSC 2 is to control camera focus
With additional settings, it can also be used to control focus motor, ISO, aperture, and the roll axis
Press and hold the power to power on DJI RSC 2
Once powered on, the screen of DJI RSC 2 will automatically display the home page
Where you can view the current user file, sleep mode icon, and the current battery level on the top status bar
As well as Follow Mode and Follow Speed
Press the side dial to the left of the screen to enter the main menu
Which includes the settings for Follow Mode, Auto Tune, the Joystick, Front Dial, and Advanced Settings
Before use, you need to perform Auto Tune and set a follow mode
Here are the detailed instructions
First, use the side dial to select Auto Tune, and press to start
The gimbal will automatically adjust its stiffness according to the actual payload to better stabilize footage
Select SuperSmooth for even further optimized stabilization
After SuperSmooth is enabled, tap to perform Auto Tune again for optimal performance
The stiffness can be adjusted on the Auto Tune screen
Go back to the home screen and select Follow Mode Settings
Select Follow Mode and turn the side dial to scroll through the options
Select Follow Speed and turn the side dial to scroll through the options
Next is the introduction of several shortcuts for gimbal control
Auto Tune Press the trigger while holding down the M button to begin Auto Tune
Lock Mode
Press and hold the trigger to enter Lock mode
In this mode, the camera will keep facing the same direction no matter how the handle moves
Lock mode is useful for shots that involve tracking or pan follow
Sport mode
Press and hold the M button to enable Sport mode, in which the gimbal tracks a quickly moving subject
If you need to remain in Sport mode, tap the trigger twice while holding the M button
Perform the same action to exit Sport mode
Portrait mode
Tap the M button twice
The pan and tilt axes will rotate 90° so that the camera is vertical
Tap the M button twice to exit Portrait mode
3D Roll 360 Mode
Press the M button three times to enable 3D Roll 360
Or set the Follow Mode on the screen to 3D Roll 360
Where the tilt axis will rotate 90° upward and stand by for a 360° rotation
At this moment, the camera is facing the same direction as the grip
Push the joystick to the left or right, and the camera will make a 360° rotation
Push the joystick to the left or right twice, and the camera will keep rotating at a constant speed
Tap the trigger twice, and the gimbal will automatically stop once it is in a horizontal direction
Tap the trigger three times, and the gimbal will automatically stop once the camera view is inverted
Repeat to exit 3D Roll 360
Thanks for watching