Take a plastic shark head which I peed in, slept with, shouted out, mount it on top of
the fin, and turn it into a 10-ton crushing monster. It's shark bin! Whey up internet,
so then it is friday normal friday night we'd all be out down the pub with having
a whale of a time! But not this year, no because there's corona's about and stuff,
so we're all stuck in. It's lockdown. Nothing's open, it's rubbish. So rather than going to bed,
I'm going to stay up all night and I'm going to make something, yes!
okay people this is the plan. A while ago you may have noticed I bought a shark head yeah! Well
tonight, what we're going to do, is make this into like a crushy shark head. so we're going to put a
hydraulic ram in it, and make it so it's got like loads of tons of crushing force. but not just
going to mount the shark head with a ram in it, i'm thinking put it on top of the bin. So it can
kind of be like, shark over the bin, ah falls into the bin, oh the world's a better place already!
right let's kind of make a plate that goes on top of the bin. Mount some stuff, work out some stuff
out, I don't know what this video is gonna be like people, it's gonna be mostly handheld. It might
be very tricky to watch. I do apologise in advance! shaky sharky! Right measure you.
A bit of drawing on the old computer.
Plate check, shark on it, big hydraulic ram,
10 ton crushing force, shove it up in the nose. oh nom nom nom.
right let's cut all this out, so we need to kind of put a plate
along here or something and then we can hinge off the top jaw from it.
My tiredness is starting to show now it's about half one in the morning, and uh I
didn't make a very good job of cutting that I mean, i know this bit is extra long but
yeah it's a bit gash around there. Right um that's our bottom jaw, now we need to work out
how the top one's going to go on. oh! It's all right people got some cheese!
Big thing there, chop it up, something like that. just gonna use one of these massive bolts,
put it through two bits like that, but we've got too much head too much thread not enough space,
so we'll have to get one of these smaller ones and just hope it doesn't sheer off in the shark head.
Will the shark head fit over the top of it?
What is it? It's half past four, it's only half past four, it don't matter!
We've kind of got a sort of jaw fitted up. In fact we don't even know what's gonna
happen when that goes up. Let's... oh man, I can't think straight now.
Let me go get some hydraulic hoses and um and connected up.
Well this whole video is pretty sketchy, sorry for the dodgy filming, here we go. he's uh
um what does that mean? let's put the shark head over it.
It's the tuesday morning after friday night after, i'm on the walk of shame where i look and think
about what i've done the night before! um some things don't quite fit right but then you know
decisions made at five o'clock in the morning are never going to be perfect are they so i need to
have a bit of a jiggle with it. Get it to fit better,
and then just kind of finish it off really!
It's finished! Now i know what your saying, you're saying Colin
it's got a hat on it! Why's it got a hat on it?
Well you see essentially this was a really simple thing to build it's just a hinge with a hydraulic
ram above it. But of course it's been made all the more complicated by trying to put it in a stupid
fiberglass shark head! I couldn't quite fit it in basically, the hydraulic ram sticks out and i
thought what better way to cover that up than with a hat! because sharks love hats! Of course they
do. uh there's a couple of other little marks and stuff, i've had to cut it in half unfortunately,
to get it all on to see what i was doing, i was getting so angry with trying to fit it,
not knowing it actually got punched! I punched the shark! It adds character. Now of
course the whole point of this i think can't quite remember now, was to chop up rubbish as i put it
in the bin. So let's do some rubbish chopping! ah right we'll start with something simple,
a broken bucket with a hole in it. Right you should make mince meat of this obviously, get in.
Its bite could have been a bit bigger.
oh this is much easier than just chucking it in the bin! oh oh no he's lost a tooth ah!
look at him, anyway, it crushes plastic. I can't even get it out. Colin Furze making life harder
since 1979. Okay copes with plastic sort of, what about a bit of wood. Have a go at this.
oh that's better! look at that! sharky sharky sharky!
minced meat of that didn't it. right let's do you again, yes!
This is fun! Well that's a bit of ply, let's try something a bit thicker.
see this is the point of it you see, you chop the stuff up
and then it just drops into the bin. hmm sort of works. Right thick a bit of wood.
Is it going to get in?
oh now look at him, he's making a right mess of his jaw now. original shark is suffering.
come on... oh!
This is my job!
What do you do for a living Colin? Weeeell
I make, make youtube videos. oh anything interesting? oh yeah yeah sort of.
Come on oh look at him with his hat on eh!
There we go, fence post, tick.
ah plastic sort of check, wood sort of check, what about a bit of brick?
yes monsters it! Right then Mr Shark, yes bricks not an issue!
What about a Colin Furze, World of Invention's puzzle? oh I don't think so,
there we are, Shark Bin! what about this wonderful clock? that's Lincoln
Electric clock, no offence Lincoln Electric,
fantastic welders, but your clock ticks far too loud. My microphone picks it up, it's got to go!
The broken satellite receiver!
Don't think it's gonna work anymore now do i. There we are my hydraulic shark
bin head thingamajiggy! Now this is kind of like a fun off-the-wall project. Just like a crazy idea
I do all sorts of things like this on my Youtube Channel, I also make some quite serious things;
made a hoverbike, I make drift trikes, an underground bunker in the back garden, but if
you like the hydraulic projects, there's a screw tank which is completely hydraulically driven,
and there is another project coming up which is also quite a funky...
it's kind of a cross between a hydraulic serious project and a very whappy idea. It's all good.
Stick around, SUBSCRIBE, notifications on, i'll see you in the next one!