because we gotta stick on this product from pro spin stadium
and it's pretty much a stick on you could pretty much check that out on our
last video where we unboxed this
out stretching it pulling it a little bit and sticking it as you go
if there's any mistakes that's okay you could kind of
a hasbro rip cord so that i could actually make
that little ridge. i pressed it really hard
on that edge this way, it was really pronounced
you could really feel that edge if you do it with your finger it's
okay but you will not get it as good as it should be and you want this
to really hug the beystadium
once you've
done it pulled it all the way through all the
way from the middle all the way out made your tornado ridge
then you pull it very tight and keep doing it keep stretching it
all the way out and then you're gonna have to cut the excess
and this is the main reason i chose the tt bay stadium because it will be a lot
easier to do the shape of the star storm stadium
would have made it a little bit harder also i didn't want to do it on any other
hasbro stadium just because of the shape of them, also i
do have other stadiums i could have tried it on
and maybe in the future you guys let me know