hi guys Kirk and Jay here with Kirk Giordano plastering today we're gonna do is I'm gonna break
out the stucco here set this door properly and install these brick molds I told the fella here
I said well the doors crooked and he says well gee how do you know that I and I was showing them come
on over here see if you can catch this first of all I looked at here this door the bottom by the
jamb is one-inch right here and over here we're two inches so either the stucco's crooked or this
and this 4x4 is crooked or this door is installed backwards a little bit of course I pulled out my
level and I didn't have to really do a level but I can see the door is cockeyed a wee bit so what
we're going to do is first thing we're going to do is we're going to break out this stucco got
gypsum board here and then stucco no big deal we can Hale that but in order to put this door
in properly we have to break all of this out in order for it to slide what's happening is it's
hitting the gypsum right here and that's exactly what he did by the way guys I'd say this fellow is
better at doors than I am I'm good at stucco but doors and electricity and plumbing they're not my
strong point so this is nothing we can't handle what we're going to do right now is we're going
to break this stucco out once we break the stucco out we'll show you how we install this stucco mold
you can use you can call it stucco mold or brick mold the idea is put a mold here why sometimes
you want to put a screen door on it if you just put stucco and and turn the corner doesn't look
real professional guys it's I went last night Home Depot and pick this stuff up and it's ready to go
on so we're going to break out and soon as we're broken out then we'll show you the next stage
to this all right guys now that we've taken off these two bucketfuls of stucco we could actually
see what the heck is going on here now this is a much specialty although I know how to do it we're
back here about a half-inch so this got to come out this way these two screws should come out
so I can see what the heck I got also and oh okay this got to come out to the Jetson board and this
actually has passed the Jetson board so we're not going to bore you or or put this all on film here
guys we're just going to put this where it needs to be and then we're going to take this craft
paper here and put our new craft over the existing craft then we're going to show you how we do these
stucco molds brick molds stops Jay's going to miter these for us and we're going to pop those
guys on it then we're going to do the stucco but now that the stucco is removed anybody can see by
eye what needs to be done that's what you this fellow should have done in the first place now
anybody really can put this door accurate it's not that big of a deal all right guys we've got
the door set now what we're doing is we're just applying flash and I got a 9-inch flashing roll
about all I have left on the truck but we just cut that in half and by the way guys the fella who did
this door and just for the sake of explanation pop that in here and cut it I'm using the door
as a guide now the fellow who did this door he put like three screws right here and three
a couple here what I was taught years ago and I'm no carpenter maybe any of you carpenters who watch
this say Kirk that's not how you do it but I was taught get your threshold level I put a level on
it we pushed it back and put put a level on this once you got your threshold level then you go to
your hinge side that's where the hinges are we put a screw at the bottom hinge get it level put your
levels on it once you got that level put a screw at the top hinge get that all set now that sets
the stage like a foundation then you put your shims in here leave it alone you come back here
then you start the exact same process you put a screw at the bottom level it put a screw at the
top then screw it all in that's about the simplest way to do it if you just try putting screws in one
side never never levels out of doors just always cockeyed anyway that's not what I do for a living
so I didn't think I'd show you all that stuff but I'm a stucco guy I'm showing you how we repair the
stucco so we are almost ready with the stucco I'm going to go ahead and finish flashing this then
we're going to trim it out with the stucco stop Jason actually is going to do that and then we'll
show you how we've put this back together with stucco okay guys we're at the stage where Jay went
ahead and put this stucco stop around there he's a better miter guy than me we went ahead and papered
it now this white stuff this is star floor on all your thing caulking we caught the edge as well
as the seat here and what I'm doing now is just hammering the last bit of wire in and you can you
can use screws nails staples whatever you choose to fasten this wire down now I just happen to have
a pouch full of nails and what I'll do is just pop a few nails here and there but if you guys
have a staple gun absolutely you can use it anyway guys that is the proper way to set this door in we
thank you for watching my name is Kirk and as usual folks we'll see you guys in the next one
you