Hello folks, Kirk here with Kirk Giordana plastering, what we're going to do today is something 99% of you
probably will never do but it's important made and show it as I do compra flashing our copper
flashing goes all the way here because all the way around the perimeter of the house
we are going to counter the copper flashing with our galvanized flashing and this gets a
little tricky here you got to have time in the grace membrane is to protect this galvanized
or electrolysis now we put this right here and I had to switch to stainless steel staples because
if i use regular staples or galvanized or screws what will happen is copper will deteriorate the
galvanized screws so the stainless steel screws I don't have that problem with these guys here
it's a compatible so I'm going to screw the drip screen encounter in there copper flashing and the
trick is protected by the Great's membrane what I'm going to do prior to reply this trip screen
is we're going to put a piece of plastic piece of plastic is yet shoot over there chain for a
second all right that piece of plastic is prior to jump screen here I'm going to do the plastics
also but I'm explain it to strip screen prior to the flash okay what we're doing here is this
is glass block right here that's it the fellows bedroom wore his office is underneath here so
everything has got encounter anything properly fellow who did this copper flashing an owner
applicator just like man what does that mean he does all of his own twerk so I've got to be it as
good as its ernie from Golden Gate sheet metal works located in alameda and that guy's good
but anyway you can see all his mitering they're done just to perfection so I've got to do all my
flashings usually I bury all this and you don't see it but all my sides are going to be saw all
of this has got to be done to perfection and again this one's going to go here and I'm going to come
here and tie it all together as we do the laugh I'll show you and we are still going to go two
layers of paper over this membrane underneath the existing stuff though when we're all done were
still going to put on acrylic coat over it but that acrylic finish doesn't get placed on this
until 28 days after the scratch and brown have neutralized cured so there's still a long ways
to go I noticed my daughter she is sliding our new paper under the existing paper see how that's done
they're beautiful and then what she's going to do is tack that on there you see we are getting there
okay guys I'm going to conclude this video point out what we generally do to where the quarter is
here where the two flashings counter we want to put our corner this corner has gotta line
perfectly with the top it's got a line perfectly down here i'll use it gun myself because I know
what I'm doing put one right there now i'm going to use because there's double metal flashings here
oh we got the copper in the steel I forget where I was because it's a different day generally what
I'm doing to attach the wire because staples are only at this point up now I'm using screws I have
to use the screws so what I'm doing is I got some custom screws got some washers on them is it a
hexagon it and I just screw them in big washers grab grab the wire so I'm not spinning my wheels
and missing a whole bunch I'm also going to put a couple screws to hold it bottom of that corner
and there you have it you may want to point over there Jay and show the end result it's just one
side of a house I got quite a bit of it anyhow this is Kirk we have Kirk Giordano Plastering,
thanks for watching thanks Jayson for doing the video we'll see folks on the next one.