Let Garmin assist getting you started with your dēzl™ OTR610 or 710 GPS truck navigator
Your dēzl™ OTR610 or 710 device will come with a vehicle suction cup mount, vehicle
power cable, vehicle power adapter and USB-C cable.
Let’s begin by going over the dēzl™ OTR hardware
The power button is located on the back of the device in the top right corner
This is used for powering the device on and off
On the bottom of the device is the USB-C port, which is used for connecting to a power outlet
in the vehicle with the included the vehicle power cable
This port is also used for connecting to a computer or AC adapter with the included USB-C
cable
Your microSD™ card can be inserted into the slot next to the USB-C port
Using a microSD™ card will provide additional storage space for maps and other data
Now that we have covered the hardware basics, let’s go over mounting and powering the
device
Determine where you would like to mount the device on the windshield
Then, clean the area with rubbing alcohol and a clean microfiber cloth
It is your responsibility to ensure the mounting location complies with all applicable laws
and ordinances, and does not block your view of the road during the safe operation of your
vehicle
Press the suction cup to the windshield and flip the lever back toward the windshield
to secure it
Then, press the mount onto the suction cup ball until it snaps into place
Next, plug the vehicle power cable into the USB-C port on the device
Plug the other end of the vehicle power cable into the vehicle power adapter
Then, plug the vehicle power adapter into a power outlet in your vehicle
Lastly, fit the tab on the top of the mount into the slot on the back of the device, and
press the bottom of the mount into the device until it clicks
We are now ready to begin the initial setup of the device
Choose your locale and select “OK”
Then, choose a language and select “OK”
Read and accept the End User License Agreement
You can connect to the dēzl™ app to access additional features including live traffic
updates, smart notifications and hands-free calling
For more assistance, check out our videos on pairing your dēzl™ OTR device to the
dēzl™ app
Next, you can connect to an available Wi-Fi® network
Select the network you would like to connect to
If necessary, enter a password and select “Done”
If you do not have Wi-Fi® or do not want to connect at this time, select “Skip”
You will be asked for your consent for Garmin to collect, use and share your device data
Select either “Yes” or “No”
Select “Email Address” and enter your email to register your device
Select “Offers and Promotions” if you want to receive promotional emails from Garmin
Then, select “Continue”
Then, read and agree to the warning
Now, we will need to create a vehicle profile
Routing and navigation are calculated differently based on your vehicle profile
It is critical that you are as accurate as possible when entering your vehicle information
Select your vehicle type
In this video, we will be selecting the “Tractor” option
The following options may differ depending on which vehicle you select
Next, select your trailer configuration
Select or enter your vehicle’s maximum height, then select “Next”
Then, enter your vehicle’s maximum width
Enter the total length of your vehicle
This will include any trailers
Then, enter the total weight of your vehicle
This includes the weight of the load you are carrying
Ensure the actual weight of the vehicle has been set for the total weight on the profile,
and not the maximum possible weight of the vehicle
Setting the profile for the maximum possible weight may result in unneeded restrictions
Select any hazardous materials that you are carrying or select “None” and press “Next”
Your basic vehicle profile has been created
The wrench button is used to edit information and add additional vehicle information such
as axle weight
Ensure that the rest of the trucking profile information is accurate to avoid incorrect
routes
Press “Select” to continue to the main screen
The initial setup has now been completed
If necessary, go to an open area with a clear view of the sky to acquire satellite GPS signals
Lastly, let’s check for available updates to your device
You can use a computer and Garmin Express if necessary, but the Wi-Fi® option requires
fewer steps
To successfully complete a Wi-Fi® update, a wireless connection to home high-speed internet
is required
It is important to avoid using a mobile hotspot
Check out our Wi-Fi® Connections video for tips to ensure your Wi-Fi® update is successful
From the main screen, select “Settings”
Then, select “Updates”
Your device will automatically search for available map and software updates
A blue download arrow indicates an update is available
A green check mark indicates it is up to date
Select “Install All” to start all available updates
Read the important installation notes and select “Start”
If you have not connected your dēzl™ OTR to a power source, you will now be prompted
to do so
Follow the on-screen prompts
These updates will take an extended period of time
You will not be able to use your device during the update
Once the update has finished downloading, wait for the device to restart
Your dēzl™ OTR610 or OTR710 is now ready to use
And that’s it!
Thanks for watching!
For more help, please visit support.garmin.com