Today I want to show you exactly how you can make an anime style Beyblade launcher
with a sparking launcher. We'll even fix this broken sparking launcher for you.
You're watching Beyblade dad, and this is one of the most important Beyblade modifications
anyone can make. As soon as we saw the Beyblade Burst anime, we sure did want to have our own
Beyblade style launcher. This upgrade will make sure that you have that extra power,
we're gonna make sure we have a full arms length worth of string to pull. I've taken apart the
Beyblade launcher. One of the biggest problems in any Beyblade launcher that you will encounter,
especially in the sparking launcher in the Takara Tomy, because they do use a very
particular spring. This is the spring that goes inside of the mechanism of the Takara Tomy's,
and this one is a Hasbro in particular that i am holding. After several different methods I have
used one of which was a fishing line, or basically a long cord made of plastic. This did not work at
all because it kept retracting on itself, like a spool, it would fit around and it fit perfectly
in the crevice where it's supposed to go, but it just wouldn't retract. It just wasn't good enough.
The next thing i did try was another cord that was from a tent. When you pitch a tent there are
extra cords that come with it, and i says, "well hey, this should be strong enough to do!", but
no. It was strong but way too thick, so the next thing i did get was a metal rip cord. I figured
that having a metal rip cord would have a strong impact on the launch, and that it would not break,
and be much more durable.. but unfortunately this is hanging wire and hanging wire is actually too
strong, and it retains its shape, and you cannot do anything with it. Boom.. So, the next solution
i did come up with, and remember that all of the products here are down in the description below,
especially the ones that i'm going to use right now. And, that is this kevlar line
this is 100 feet of braided kevlar line it's 40 pounds strength. So, this is about four arms
length left, we're gonna see if we can put it all in the winder, wind it up and put it inside. If we
cannot get it all in, we'll get the maximum. Again let's let's do it! This is the part that creates
the rotating motion this is the housing for the spring, make sure to stay to the
end of the video to know exactly all the full details and little secrets that i picked up
along the way. We do have to make sure that this little stopper works perfectly fine.
As you'll come to see one of the hardest things to do so that the spring inside doesn't
pop back out one of the best strategies that i've come up with is to actually make sure-
- right now i'm trying to hold on to it because it's pressured,
(I've been turning it) and so it's tight right now. If you could see in here, I've actually made
a little bent in that coil so that it actually stays onto this little nub of plastic, and that
actually gives it extra support.I can pull on it pretty hard, and so here we are. I closed it up,
we got the line in there ready to go but i want to add my pull cord
now. This is what i've done i had to drill this out, but this one's a lot easier. So here we go
pull it through a little bit make sure that pulls back all the way back comfortably, so let me
show you exactly how long it is. I'm gonna do the launch, a couple of launches and let's get it done
let's put hyperion in there
both of them looking really good launchers still launching
so yeah guys let me know what you think let me know if you're gonna try it of course all the
links down in the description below if you're gonna buy the line yourself it is actually
kite line, so really cool i'm so happy to be able to share this with you guys.