Vending machines of some form or another have been around at least since the 1st century
AD, with the first known of such being supposedly made by Hero of Alexandria, a Greek engineer
who invented, among many other remarkable machines, one to automatically dispense holy
water.
(Though it should be noted that many historians think it likely that at least some of Hero's
machines were probably invented by others before and simply documented by Hero.)
Whatever the case on this one, as described in The Pneumatics of Hero of Alexandria,
If into certain sacrificial vessels a coin of five drachms be thrown...
When the coin is thrown through the mouth..., it will fall upon the plate... and, preponderating,
it will turn the beam..., and raise the lid... so that the water will flow: but if the coin
falls off; the lid will descend and close the box so that the discharge ceases.
Thus, in a nutshell, you deposit a coin of sufficient weight, it drops onto the plate.
This causes the plate to tilt down, opening a valve, which in turn allows the holy water
to flow.
Soon the plate will tilt enough that the coin falls off, at which point a counter-weight
pulls up said plate.
When it reaches its top position, the connected valve is shut.
Of course, this machine had no mechanism for continuing to work properly if the holy water
froze.
Clearly Hero was smart not to quit his day job as a teacher...
Moving swiftly on to relatively modern times, vending machines of a variety of types began
popping up more and more over the centuries, with an explosion in popularity occurring
during the 19th century.
For example, by the 1890s the German chocolate maker Stollwerck was operating a network of
close to 15,000 vending machines that dispensed their chocolate.
Around the early 20th century, selling beverages in vending machines became just as ubiquitous,
though not storing bottled drinks at first, instead simply dispensing water and the like
from some form of fountain.
Notably here many of these early fountains did not provide cups, other than a single
common container...
Naturally, this metal can shared by everyone who used a drinking fountain, whether of the
vending machine variety or free for public use, was eventually deemed less than sanitary.
So much so that laws were passed in some regions banning them.
In attempting to find a solution to the problem, lawyer Lawrence Luellen envisioned disposable
paper cups that could be dispensed for a penny (about 29 cents today) via a specially designed
vending machine.
And so it was that the American Water Supply Company of New England was founded in 1908,
eventually becoming the more familiar sounding Dixie Cup Company.
Beyond just dispensing disposable cups, one design, the "Luellen Cup & Water Vendor" also
contained a large jug with water, a large ice container to keep the water cold, and
a garbage can to put the cups in after use.
Much like Hero's and the other beverage drinking machines up to then, this one had no means
of keeping the liquid from freezing either.
This finally brings us to slightly more modern times.
Ubiquitous today, with Japan having the highest number of vending machines per capita at just
under 6 million (or about 1 vending machine for every 22 people), one of the most popular
vending machines is the kind that dispenses life giving water-based product.
For some odd reason, many of these are placed in that eerie region that exists outside of
our mother's basements known as "out of doors".
This area, which exists in a region that has no solid barriers between you and the never
ending void of space, occasionally gets cold (we're told), despite the silent glowing orb
in the sky watching, judging, showering us in ionizing radiation in its efforts to destroy
us all!
While you might think surely these modern outdoor units which exist in such a deadly
environment must have some sort of dedicated heating mechanism inside, it turns out this
isn't always the case, even in relatively frigid areas.
To be clear here, the varieties of designs of vending machines out there are immense.
But, it turns out that the tiny bit of heat given off by the internal evaporator fan and
circuitry is, in many climates, sufficient to keep any drinks inside from freezing.
You see, in order to be as energy efficient as possible, bottled beverage machines are
extremely well insulated and sealed.
In fact, in some modern peak shift vending machines, they primarily cool the internal
beverages at night when electricity is cheapest, bringing the liquid as close to freezing as
possible without turning their innards solid, and then just let the insulation do the rest
during most of the day time.
Coca-Cola reports their machines using this design on average use only about 5% of the
daytime energy usage as more typical machines.
Beyond insulation, the sugary or diet drinks generally found inside have much lower freezing
points than pure water.
These two things combine to make it so active heating is not really needed in many regions.
As one vending machine stocker in Kansas, which for reference sees average lows in its
coldest month of January at around 20 degrees Freedom or -7 degrees Celsius, notes, "[In]
30 years I have only seen 1 freeze up...The evaporator fan motor will provide enough heat
to keep it from freezing...provided everything else is sealed up good..."
That said, some regions get colder and require more than just passive heating.
The most common mechanism for dedicated heating is simply wiring in an incandescent light
bulb socket and screwing a 40 or 60 watt bulb in.
This is then automatically switched on when temperatures drop below a set level.
As for the location of the bulb, it is usually placed near the top of the innards to ensure
the drinks below, which are dispensed first in many designs, stay as cold as possible
away from the heat source.
For those wishing for an alternate solution, some machine designs use heat pump systems
capable of reversing and heating the inside.
Beyond allowing these units to function well in even some of the coldest of populated regions,
these systems are also among the most energy efficient at cooling as well.
But to sum up, thanks to being well insulated and the lower freezing points of many of the
liquids contained therein, the heat given off by the internal components in vending
machines is usually sufficient to keep things from freezing.
Where not sufficient, a simple incandescent light bulb relatively cheaply solves the problem
in even some of the coldest populated regions of our little planet sized space ship.
Bonus Facts: • Among the astounding number of other devices
created by Hero includes essentially the ancient equivalent of a modern door chime, but instead
of using a bell or the like, Hero used a trumpet.
This system was apparently installed on temple doors.
In a nutshell on this one, when the doors were opened, it caused a vessel to descend
into water in a container, thereby creating a bit of water pressure which in turn forced
air through a trumpet, causing it to sing the song of its people.
When the door was then closed, it draws the vessel back up, as well as air back into the
trumpet and device in reverse, ready to blow again when the next person opens the door.
I'm sure this never annoyed any meditating priests.
• Fun fact, many modern network controlled Coca-Cola vending machines are able to be
enabled for dispensing their contents for free at the push of a remote button.
Coca-Cola occasionally uses this feature in times of emergency as a form of disaster relief,
notably used in this way during the 2011 Tōhoku earthquake and tsunami.
Some designs of these machines even include things like solar power and batteries or generators
to continue functioning for a time in case of power outage.
As you might imagine given their added cost, most of these so-called "disaster relief vending
machines" are only installed in places like hospitals, schools, and a variety of such
places where people tend to congregate during extreme disasters.
So downside- tsunami.
Upside- free drinks!
• Speaking of incandescent lightbulbs being decent little heat sources (using about 95%
of the power they consume for heat, rather than light), one company in Germany attempted
to use this fact to get around certain government regulations.
You see, given newer, more efficient options became commercially available for lighting,
such as CFL and LED lights, governments began instituting regulations, first limiting and
ultimately banning the sale of incandescent bulbs in various regions.
For example, in the United States, the phase-out began in 2012, while in the European Union,
it began in 2009.In order to get around the rules and regulations here a couple of entrepreneurs
began marketing old-fashioned light bulbs as a useful and convenient alternative heat
source which they dubbed the "heatball".
The brainchild of German engineers Siegfried Rotthäuser and Rudolf Hannot, the heatball
was sold across Europe, and its marketing touted its convenience, since the heatball
would, to quote, "fit into any conventional socket" made for light bulbs.
At the cost of just €1.69 (~$1.86) per bulb, the heatball sold like hotcakes - when the
first lot of 4,000 was made available in April 2010, it sold out in just three days, with
a back order catalogue of over 40,000 units upon its debut.
As you might imagine, EU officials soon stepped in, seizing a second shipment at the airport
in Cologne, France in November 2010.
At the subsequent administrative hearing in Aachen, Germany challenging the seizure, Rotthäuser
and Hannot appeared with a mobile heating device that primarily comprised of a ribbed
metal plate and battery connected by wires to 100-watt light bulbs that heated the metal.
The administrative judges remained unconvinced of the bulb's efficacy as an alternative heat
source, and they banned the further sale of these newfangled heatballs.