Hi I'm Mat from eSpares.
In this video I'll be showing how to change a drain hose on a dishwasher.
If you drain hoses has become damaged and is leaking it is necessary to replace it.
For this video i will be using a Gorenje built-in dishwasher,
but the process should be very similar for other makes and models.
Safety first: Always unplug the appliance before carrying out any work.
The next thing I need to do is to move the dishwasher onto its right hand side.
It's a good idea before you do this to remove the filters and also to dry out the sump with a sponge.
Now there may also be some water left in the machine so it's a good idea to keep a towel handy.
The drain hose is connected to the drain pump at the bottom the machine.
The next thing I have to do is to remove the base plate by undoing these four screws that hold it in place.
Most dishwashers will have an anti flood device connected to the base of the machine.
In this instance it's not necessary to remove it
as it has long enough wires that I can simply move the device and the base out of the way.
And here we have the drain hose connected to the drain pump
What we have here is a manufactures clip holding the drain hose in position.
This isn't designed to be reused.
So as well as purchasing a new drain hose,
we also recommend purchasing a 30 millimetre jubilee clip to replace this clip.
I'll show you how to remove this one,
get a good grip with a pair of pump pliers and work the hose from side to side off the pipe
and gently pulling down at the same time.
Here we can see a non-return valve has also come out with the drain hose.
This is designed to stop water re entering the shape so grab your
pump pliers again and gently maneuver that out of the hose and returned to the drain pump.
The next thing I need to do is to remove the drain hose from the back panel.
I need to separate these back panels by undoing the six screws that hold them into place.
I also need to undo one of the screws the holds the side panel in
to be able to maneuver these back panels out of position
this is the screw that undoes the side panel
which will allow me to maneuver the top back panel away.
Now the only thing I need to do
is to remove the grommet the holds the hose into place which separates as you can see,
and pull the drain hose out
With the old drain hose removed
I can now fit the new hose and jubilee clip.
And simply tighten up the jubilee clip.
Next I need to refit both parts of the grommet
and locate back into the back panel.
With the grommet in place I next need to carefully
refit top part of the back panel.
It can be quite fiddly this but do you make sure
you're putting it into the correct position.
With the back panel in place I can now screw it back together.
With the back panel now secure I can refit the base.
So there we have it one new drain hose fitted to the dishwasher.
Drain hoses and all other parts dishwashers other appliances
can be found on the espares.co.uk website
Thanks for watching.