Walking into a department store, you're
often hit by a variety of smells coming
from the perfume department.
How do they make all these different scents?
Well, one way they do that is by separating out
chemical compounds and mixing them in different ways
to get their own brand-specific formula.
But in order to isolate the chemical compounds,
one of the techniques that's frequently used
is known as extraction.
Extraction can be done in your organic chemistry lab
using these two main pieces of glassware.
The first which is shown in blue is
known as the separatory funnel, or the sep funnel for short.
At the top of this, this has an opening
through which you can pour in liquid.
At the bottom, you have the stopcock, currently
shown in the closed position, which
prevents liquid from flowing freely from the sep funnel
and into the flask, shown here in pink.
This happens after you shake the sep funnel and allow
the mixture to settle.
When you pour in a mixture of liquids, what you'll often
notice is that you get two different layers, one
on the bottom and one on top.
This happens after you shake the separatory funnel and allow
the mixture to settle down.
But what does this mean?
This means that these liquids or solvents
have different densities, with a higher density being
on the bottom and the lower density floating on top.
Often, these will represent the organic phase
and the aqueous phase.
The aqueous phase contains the water and other charged
species, or ions, whereas the organic phase contains
uncharged species or neutral compounds.
So how exactly do we do an extraction?
Well, first of all, you need to open the stopcock.
And when you do that, you'll see that although you still
have your organic phase up here, the aqueous phase is now
able to flow down the sep funnel and into the flask.
And once you've collected all of your aqueous layer
in the flask, you can close the stopcock again,
which will leave you with just the organic phase in the sep
funnel.
Now that we know how to do this in lab, let's look at compounds
we'd be able to separate.
For example, take hexane and propanamine.
What do we know about these two compounds?
Well, hexane is pretty neutral and propanamine
is basic, because of its amino group.
So in order to get one of these into the organic layer and one
of them into the aqueous layer, we'd
want to make sure that we can produce an ion
and leave one other compound uncharged.
To do that, we can add an acid.
By adding something like hydrochloric acid,
what you'll find is that this amino group, the nitrogen,
these electrons can deprotonate the HCl
and leave behind just a chloride anion, which
means that in your aqueous layer you
would have a charged amino group,
whereas in your organic layer you would just have hexane.
There, you've done your first extraction.
So next, in this example, you have hexane and phenol.
Phenol is weakly acidic.
This means that in order to get phenol into the aqueous layer,
you would want to add to a base.
We can use a base like sodium hydroxide,
which is a strong base.
And what you'd find is that these electrons
would be able to deprotonate the phenol,
meaning that in the aqueous layer
this time you would be left with the phenolate anion.
And in the organic phase, you would just have the hexane.
Let's do something a little bit more complicated.
What if instead you had three compounds this time, hexane,
phenol, and acetic acid?
Well, in this case, if we took the approach
we took previously, which was trying
to add a base to get these acids into the aqueous layer.
If we tried adding NaOH, we'd find
that since this is a strong base,
you would easily deprotonate not only the acetic acid but even
the phenol.
So let's try using something else instead.
If instead we had a somewhat milder base like sodium
bicarbonate-- and I'll show its structure here--
you have this anion with a sodium cation.
And since this is a mild base, it
won't be able to deprotonate very weak acids,
meaning it won't be able to deprotonate the phenol,
but it will be able to deprotonate the acetic acid.
This means that in your aqueous layer this time,
you would have the acetate anion,
while in your organic layer, you have hexane
and you have phenol.
How do we separate these last two?
Well, we've already done that in the previous example.
So to get just one compound into the aqueous layer,
again we would want to add a base, but this time we
can use sodium hydroxide.
The hydroxide, these electrons here,
would deprotonate the phenol, giving you
again the phenolate anion, along with the hexane
in your organic layer.
And now we've learned how to do extractions.
So when you're actually doing this in the lab,
you'd want to make sure that you save each and every layer.
What happens if you accidentally toss one out into the waste
container?
Well actually, using a multi-step extraction,
you'd be able to recover your product from the waste
container.