you first go to the trigger menu in the scope, select Setup Trigger,
Hi. My name is Min-Jie Chong from Keysight Technologies.
I am the high-performance scope product manager with the Oscilloscope and Protocol Division.
Today I want to show you the new Infiniium V-Series oscilloscopes...
and tell you about the new capabilities that come with the new scope.
The Infiniium V-Series oscilloscope is the best-in-class signal integrity oscilloscope you can find on the market today.
It delivers the lowest noise floor, the lowest jitter measurement floor,
and also the highest effective number of bits.
What this means is you will get the truest performance of the signal...
and also the most accurate measurement for your design validation.
In this short video, we're going to show you the top three customer needs...
that the V-Series addresses.
Let's begin.
First, the Infiniium V-Series oscilloscope provides the industry's longest 160-bit hardware serial trigger...
that works up to 12.5 Gb/s.
What this means is you can use it to trigger on long sequences of rare events...
in your bit stream in order to find and troubleshoot the problems.
In fact, the V-Series is the only scope you can use to trigger on long symbols...
that you can find in USB 3.1 applications that have 132-bit symbols...
as well as PCI Express Gen3 with 130-bit symbols.
In order to access the hardware serial trigger, you first go to the trigger menu in the scope,
select Setup Trigger,
and scroll down the list until you find the Gbit Serial.
Select that.
The next step is to configure the data rate.
It has already been configured to 5 Gb/s, which is what the signal is transmitting right now.
Next, you want to configure the value.
And you can see here that it allows me to configure up to 20 words.
That is equal to 160-bit.
I'm going to show a simple hardware serial trigger here...
by keying in the F and A hexadecimal value.
And, when I hit enter, you will find that the hardware serial trigger is locking into the bit sequence...
that I wanted it to trigger on.
Secondly, the Infiniium V-Series oscilloscope comes with the 30 GHz active termination adapter...
that provides DC voltage termination to signal.
This is ideal for applications such as...
HDMI 2.0, MHL, and also MIPI M-PHY...
that require a signal to be terminated into a DC voltage.
Right now, I have the adapter attached to channel 2.
In order to change the termination voltage,
I go into the channel menu, select probe,
and right here I can go into the probe option and change to termination voltage.
So, assuming that I have an M-PHY signal and it needs to be terminated into 200 mV,
I need to enter the 200 mV here...
and then the 200 mV is now applied to the signal that I am measuring.
The third customer need that the V-Series addresses is to provide the InfiniiMode feature,
which is the ability to make differential, single-ended and common mode measurements...
using one probe tip without reconnecting the signal.
The InfiniiMax III probing solution will provide the InfiniiMode capability up to 20 GHz bandwidth.
What you are seeing right now is a USB 2.0 packet that we are measuring differentially.
You can see that the signal is swinging to +400 mV to -400 mV, and this is the differential signal.
If I want to change it to a single-ended measurement,
I can go to the setup probe configuration.
Instead of having it configured as differential,
I can select single-ended A, which means I want to look at signal A to ground.
This is the single-ended measurement that I'm getting without changing the probe connections.
What if I wanted to look at common mode?
Again, I can go to probe configuration menu and select the common mode feature.
So, the probe is now taking the common mode measurements of the A and B signals that are going into the probe.
In summary, the Infiniium V-Series provides the best signal integrity for your measurements.
In addition, the V-Series addresses top three customer needs:
With the industry's longest 160-bit, 12.5 Gb/s hardware serial trigger...
With 30 GHz active termination adapter...
And the InfiniiMax III+ probing solution with InfiniiMode easy and convenient probe head.
For more information and to get a quote,
please visit Keysight.com or contact your local Keysight representative.
Thank you for listening.