Welcome back to Albany County Fasteners - Fasteners 101
I'm Bob and I just purchased this new Dewalt 20 volt max,
lithium-ion grinder. Four and a half inch or five inch (grinding wheel).
We're going to be putting this baby to work in the next couple of days
which i'll have in another video but I wanted to do the unboxing
of this product to show you what we've purchased.
So that's basically the box that it comes in.
We won't need that anymore.
These are the directions that come in the box.
You get a side handle. You get a wrench,
to put your discs on. Let's see what's in here...
We get a 5-inch grinder blade.
We're mostly going to use this for cutting, not grinding.
This handle can go on the right side or the left side,
if you are going to use it. Me? I'm probably not going to use it but i'll figure that out before my next video.
It has this retainer. I bought some 5 inch cut-off blades.
We're going to be cutting off some structural steel.
So i'm going to put that on and then I'm going to put the retainer back on.
There should be a button here, which is right here on the side.
Then we're going to spin it until it stops.
There's a little groove in there that it catches so the blade won't spin
anymore and you're able to tighten the blade on there.
But it seems that I need some type of...oh I see. Let's go this way.
There it is.
I'm going to take the wrench, put that on there. There's two holes in there
to pick up these two little prongs at the same time you got to hold the button,
so the wheel doesn't turn.
I'm going to lock it in place. There we go.
All set. What's nice about this unit too
is you can pop off the guard.
It has a little latch here that you can pop up
and you can adjust the guard.
So that's great because, depending on what you're
grinding or what you were working on,
that will make a difference in how you use that.
It's Important that you use safety glasses when you use this product.
That's basically the unboxing of the Dewalt.
The model number, this is a 20v Max Grinder model number DCG412.
It does not come with any batteries
so it's just an add on to the set that I
presently have right now. We're going
to test this out on a project.
I'm now going to demonstrate this DeWalt
20-volt max brushless grinder, DCG412.
I'm going to cut a piece of 3/8" steel.
I'm going to see how this grinder works.
Not too bad. Worked pretty good, the cut off blade.
That was 3/8" steel. Thanks for watching.
There you go. Subscribe, like, comment.
Visit us at albanycountyfasteners.com
for 50,000 SKUs right off the rack, ready to ship.
We look forward to seeing you in our next video.
you