hello guys this is Joe from mac plastering services and some of you have probably seen
clips of this job in previous videos, just thought i would take a run around the job when
i was finished and show you all the finished plaster work and how it turned out obviously
a lot of work to do by the other contractors to finish around the job but i will just
show you what we have done all the slap dash done on the outside so yea all the exterior
work is done a wet dash slap dash rough cast with a plinth put on with a 45 degree angle
cut into it and reveals rubbed smooth there leaving the dpms on to be cut off and siliconed
later on that was patched that in around the roof came in pretty well so it should paint pretty
flush looking. This is all the interior all ceilings were bonded and skimmed and its a very big
ceiling believe it or not the floor still to be screeded in, the ox trowel has done all
the solid plastering work and a refina brush that i am also revewing guys a full reveiw
on it soon it was light and very tidy for brushing in all my angles and stuff i do use a small
brush as well for finer work get the angles cleaner celinings drying out well the high
ceiling was hard to get at had to set up planks and tressels just to get the height .Nice wee
angle work here and that was a flue for the chimney thats going to be going in sorry i
meant fire that is going in its going to be a wee burner there should heat that whole room
perfectly i would think up into the loft here there will be a wee hatch put in here by the
joiners of course the loft is drying out real well who ever said curves weren't beautiful
i dont know dont know why the video was very blury i think it was just the light coming
in the window is a very nice room nice shapes love the curves on them types of rooms dont
know why i videoed in the bathroom because it is pitch black i should set up a light
for the camera on this wall in particular in the sand and cement on that window wall there has been some fibre
in the sand and cement a guy has asked me to review it i will be back again to take a quick shot
just to see if it has cracked or if it has stayed the same perfect as it is crackless
i have used the fibres in other jobs in floor screed that i did it was a bout a centimetre
thick in places and there was never no problems it was solid so gives an idea
whether or not it can work on window walls and stuff where u get them cracks around the
concrete heads just all the weak points that was a clip of the stuff that we used on that wall