first you must build a tank is exactly what world of tanks have asked me to do yes world
of tanks the free online multiplayer battle game said Colin as master builder on the internet we
challenge you to make a tank now forced a lot to the game for inspiration they have got a massive
array of tanks is about 550 tanks in the game they come from you know First World War Second
World War all sorts of different makes and models and all that so they've got various
different terrains we can look at climbing across the course they've got their battle
arenas you know there's also there's lots there's lots in there but Colin pace differently doesn't
he alright think outside the box not thinking sure I want to make a tank with tracks on it I
want to do something a little bit different cuz that's what we like at the coin first channel we
like to be different don't we yes we do okay so I want to make a screw tank now they suck
a corkscrew an Archimedes screw put this on the ground and turn it obviously it would just roll
across the terrain like that that's no good but if you stop it so if you fix it either end and
then try and push it obviously like a screw thread it wants to worm its way forward now if you have
two of them either side of your vehicle turning against each other it kind of tracks forward okay
logs everything they can go all over the place it's quite a versatile machine and you don't
see many of them so I thought we're never good at building one of them there's a little bonus
for you viewers if you type the promo code tank tastic into World of Tanks you get yourself a
free t1 to seven tank 500 gold and seven days premium access it's all good right just just
measure me I'm a minute but 700 I'll come in and a mr. Archimedes screw we shall make you
right so this is basically gonna be half of a screw there'll be another bit on top of it
and then we'll also have a peak on the end to help it like kind of scale up rocks and
stuff now because we join in two of them together they've got to be absolutely spot-on if they're a
little bit wonky then they won't join together properly and you'll end up like it will just go
crazy and light just mess itself to bits so everything's got to be a triangles properly
clamped together now first thing we want to do I don't want to overlap the two bits of metal
like this so we're gonna mark down here and we're gonna stick it in the bead roller and
put off a little bit of a like a kick sort of thing so one of them like kind of kicks
underneath it and then we can weld that up weld all the bits in tack weld tat when tat well and
then hopefully we'll have a perfectly round square true cylinder then we need another one and a cone
lots
you eyes
there we go finished pretty good seam looks nice it says it's not
too heavy try to make it as light as possible because wait it's not
our friend on this project so that's that one doe just need one more column
well I've got two of them next off make the point a bit
well could you use that for
you just raise these bulks knew that measurement we took earlier would come in handy
we got it back and we've got a front put the cone on the top there I've not finished the very tip
of it off because I need to know exactly where the center is and to do that we're gonna slide
the axle through which is a 50 mil bit of bar at the moment slide that fruit to keep that
dead centre I've made these little patterns which part of go over the studs on the inside
hold it dead center so we can slide it through and then right on the end I've got this little
friend which I've put some captive nuts on already slide that over whaled it to the tip of the cone
and then therefore if the tip of the cone is a little bit off or anything like that this will be
where it exactly where it needs to be so it won't really matter and then down the other end I got
this plate as well right let's get on with that and now we'll see oh you see my tube the phone
oh this is a most interest in the footage now is it tube gives birth to man
all right that's all right it's not bad he's got a little bit of a wobble we're only talking like two
or three males I think I can cope with that very strong as well up it helps me people always said
I should make a nuke for ten million subscribers here we are right next thing we need to do he's
the screwy bit the screw thread now they mess around with various different patterns and whatnot
and various ways of attaching it arm and although this is quite a good way of doing it material wise
it's not very efficient way for me to cuts the [ __ ] I can only get one of these here more
squares so I'm gonna go for quarters because I can get nine to them on my plasma cutter which is
a revolution and a bit I did mess around with try and put little bends on them and little kicks to
try and fix it on slightly different now I'm just gonna go straight quarter whack it on there right
oh yes you gotta be pleased with that that looks awesome but of course we don't want one of them
we need to UM yeah oh if only if it was that simple right so we have got two screws but
there is also a lot of question marks are they gonna be strong enough are the axles
just going to twist to pieces is this peach too aggressive is this spiral bit is it too high I
have no idea so the next video we need like a chassis to bomb the two together and then
we need to start working on the drive we've got a hydraulic pump an engine a seat oh it's
gonna be so cool some louvers are there is so much more to do now of course let's not forget
the sponsor World of Tanks without them this wouldn't be possible this is a very expensive
project so go and check them out it's a hundred million people playing this game this something
there whether you're a pro or a novice you don't have to pump loads of money in it to
win it's free to win so they say so use a link in the description use your promo code support
them support the channel of course subscribe you don't know miss the next video we need a
chasse and stuff we need all sorts of things we need to get script t'ankin see in the next one