Hey what's up guys
This is a Coplex IT Learning Video
we are going to configure SSH for a Cisco switch or router
now with any today we can use a 3550 switch
but the same process can be applied
to any router or switch here so lets started
we need to do five steps, we need to do the hostname
a domain name, generate the key
create the user and also
enable SSH on switch
lets get started
right lets go
hostname type enable the
configuration terminal - take you to global configuration
hostname
Coplex
okay now we're gonna move over to the IP Domain name
IP domain-name coplex.co.uk
great so now we are going to generate
the key using the Crypto Command, crypto
key generate
RSA
Yes to overwrite
how many bits for the
key so the bigger number you put it the stronger the key
more resources on now most recommended
is 1024 so pop that, enter
generate the key may few minutes
perfect so now
we will enable SSH
in the line vty
type line vty 0 15
15 because this switch has 15
channels of which remote into we want to change
the whole 15 so thats why we put the range
enter
transport
input ssh
enter
switches is configured
add a user now. Exit this
and create the user user name
username sam password cisco
we need enabled the local login say what
line vty 0 15
login local
Enables local login using the
username and the password
Need this to work
All Done!!!
open PuTTY
IP address
open
now if you haven't set up an IP I will show you
Username Sam Password Cisco
Thats how we set up SSH
so set the IP address on the Vlan
were we remote on to
Rico face
interface Vlan1
ip address 192.168.0.112 255.255.255.0
ip address must be the same network as the computer
unless you are using NAT
use the same ip range
Finished
please check out the website
Coplex.co.uk
thanks for watching