More accurate iPhone 14 size
right
in this box
hello everyone I'm Apple Daddy our
quick unboxing today was very, very interesting we're going to take out a box like this ok
the last time we took out a box like this it
had an iPhone 14 related stuff This
time it is also the same as iPhone 14
related stuff
and it is a little more refined than the last one, that is, it
is more accurate. The size of the iPhone 14 is in
this box.
I’m looking forward to what you can guess.
I
do n’t know. Do
n't know what it is,
wait
a minute
. It has a word
, a way of saying
it ,
wait
a minute According to
the industry, it
is the soap dispenser for
the
iPhone 14. We have unpacked the
iPhone 12 and 13 before, but
this time it should be the first
soap dispenser we got. Well , let's take it
out one by one. The first one is drawn first.
This is the mold they used to open the mold for the mobile phone case.
This is not a model machine.
Of course, that means waiting until later.
Usually when this thing comes out,
they call it a soap machine,
and then
when there is a model machine
There will be some distance
in the middle, and this is what they use to see
the most accurate size of the iPhone 14 they
know now. There is a 14 Pro Max
on this side first, the
iPhone 14 Pro
here and the iPhone 14,
and finally everyone should look forward to it.
It is the iPhone 14 Max
. You can look at the ratio of this size and
you can feel what it looks like on it
. I think the most important thing is the ratio of the camera
. We all know the ratio of the camera.
This time on the Pro series,
their main lens
cannot be said to be. Totally 100% sure,
but many sources say that
their main lens part will be
enhanced to 48 million pixels
, the overall camera module should be a little bigger
, then we will have a phone case for comparison,
here. Another important point is that the 14 Max on
this large platform
now looks like its entire camera module does not
seem to be
much different from the previous one and the 13 mini. As a whole
, we will now look at the raised part of its camera, which is connected to its camera. The hole
part
doesn't seem to be used for cameras of this level,
so in fact, when the
iPhone 12 to 13 was the
first time,
they made the modules of the two cameras, the
general 13 series, and the Pro
series a big one.
This time, we are very likely to see that
the 14 and 14 Max will also use
the main lens of the 13 Pro or 13 Pro Max
and then match it with an ultra-wide angle
or how they will adjust their
progress.
I know, but now What do you think about
this ratio? Do
you feel that it seems to be very
small
? I feel that this ratio is very unbalanced. I think this ratio is
14. It is OK
.
I think why is there such a problem?
The biggest reason
In fact, I think the 14 Max is a
model that I didn't plan to make. It's
just because of the
overall design ratio. If you match 14 to
14 mini, 13, and 13 mini,
I do n't
think this ratio is OK. It
feels too unbalanced, but
then the mini cut it off anyway and replaced it with
one
that
everyone likes and everyone wants. Now there is a 14 Max
, but at the same time, if you match it with this kind
of entry-level camera module, it will
feel like This ratio is very strange
. Well , let's take a look at
the place where the holes are. I
have a 13 Pro Max
. I have a mobile
phone frame. We can put it on the frame first
.
At least see if the whole frame, buttons and other parts match.
I am using the frame of the Extreme Air Armor.
Then we will remove it. Which one
should we replace first? Which one do you
want to see? Pro Max
Pro Max is good,
it seems to match now. The
button part seems to be a little different.
OK, then I guess
this is the same as when it was 12 to 13.
We also went to test the phone case and then
when we went to test the mold,
we saw it. The button is a little down. Do
you know the reason for this? Do
ordinary viewers watch the video carefully? The
button
is down?
Enter a larger camera module,
so
there is no place to put the power button next to it. There is no place to put the module
inside,
so they have to move down a little bit,
so we should see it this time, it
should be full and obvious.
This time the 14 Pro Max With the 14 Pro
, their overall camera module will really become larger.
This is what I am looking forward to because I like it very much.
I am very concerned about the specifications of the camera.
I think this is the first big evidence.
You can see that
its camera model
The group will really improve,
and the volume button next to
it still looks the same
because there is no need to adjust it here. Well
, the bottom part
now looks like it
should still be the
Lightning port. We probably guessed it before.
OK, this is If we come again,
shall we put it on the Max?
Wait a minute. I also have a frame on the ultra-air combat armor.
It is also the
14 Pro and 13 Pro.
I put it on this side
and we can be sure that it
looks like it
has changed.
OK ? The same for you, you see this is the frame of the 13 Pro Extreme Air Armor,
and then you see that it is in the place of the power button, and the
soap dispenser is also moved down,
OK, this should be evidence It's obvious that
this is their camera module will change . Super happy
. Well, we put it
on the 14 Max. We'll use this to put it on the 14 Max.
I guess it won't change
. You think its buttons won't change.
Is it OK ? The volume looks like you guessed it, so it looks like the part of the
power button is on the 14 Max
. Of course, we can't say it's final.
We're
using the soap dispenser
to judge it with this mold.
The position of the button has not changed
, so can this case share
the case of the 13 Pro Max,
but I don't know if the frame is the same.
If the frame is the same, it may be OK.
At least the case of this extreme air armor
looks OK at the moment,
but we just set it like this. When you get
up, the two lengths are the same,
because there is another saying
that it is a little longer.
The length of the mobile phone is a little longer, that is
, it is not.
It is a little longer on the Pro series.
Now it seems that it may not be.
Wait
a minute. Seeing another point, let's
look at the opening of the microphone.
You can see that on the 14,
its opening is closer to the previous opening on the 13 Pro
or 13 series. On the 14, it actually looks like
its microphone. The opening is a little thinner,
so you can see it?
It’s only after a careful look that you can see that
its
opening is a little thinner.
Let’s take a look at the
previous part of the screen protector.
We directly paste the screen protector on the
Visually , this screen protector doesn't seem to be so accurate,
because
if we look at the opening on it, it's
actually a little wider
. It should be difficult to take a picture.
It's slightly wider,
about
1mm wide on the left and right.
So the model machine is wider, the
model
machine is wider
, so I think it is very likely because the speaker hole on it is pushed upwards and more,
because some people say that its screen will be bigger,
so it is said that it needs to be wider and then pulled It's OK to be a little flat.
Anyway, we may wait for a more
accurate model. When the model machine comes,
we will come back to this part. We
can look at this with a certain degree of certainty.
Then I want to know the place where the camera is opened. I have this one.
It is the original shell of the 13 Pro Max.
We will use the original shell for comparison.
Put it on and see. Do
you think it can fit? It
seems to be almost the same
. Do you think it will not fit
in the camera hole? Click
OK
and you can see that the hole for the camera is much
bigger .
The original 13 Pro Max's shell
can't fit at all,
so whether it gets bigger or shifted is
a good question
, because in fact, there are probably several ways to see it. Lah,
if each camera module is getting bigger, then
it must be shifted. That is to
say
, it is the camera module
, so it is possible that the module inside is getting bigger, but
the frame outside may still be the same. That's
a good question
. I'm not sure,
I'm going to turn it around and see
if it's like If it needs to be shifted like this,
usually it must be the camera module
. Maybe it needs a little more space inside,
so it needs to be moved down a little bit, but
will the whole frame be much bigger
? I feel that the frame of yours can be stuffed into it, but it ca
n't be stuffed too well. That's
right
, so the whole frame has become bigger.
Yes ... If
it looks like this,
the whole frame has become a little bigger.
Anyway,
its module has become bigger. That
’s right, the
module has become larger and shifted
, so in this case, it is certain that
no matter how the camera module is changed , or how much the overall size is increased or reduced, the
previous shell can never be used
except for this camera module.
In addition to the place, the opening position of the power button is
also different. What about
the
Max? Can you read this? The
camera module is correct.
Good question.
Well, let's see if there is
a way to use the old Max. The case of the Pro Max is because
even if the camera module is not the same
, there is no problem. It just looks abrupt, and
it may seem to be barely acceptable
, but the place where the camera has a hole
just looks relatively different
, so it is a case. It
's bigger right
...because this is the case of Pro Max, this is the case
of 13 Pro Max, and the inside is 14 Max
, so the place where the camera hole is opened looks
right , but it is different, but that means we are testing and saying
that
the case is not good. Yes,
can the
old one be used back,
but I think very few people who buy the 13 Pro Max
will use it like this again.
We are just a little bit thinner than
the camera module size, but it is not as thick as the 13 Pro Max.
Because of this gap in here, it
feels a little bit,
but of course it's a soap dispenser.
We can't be 100% sure
, but it looks like this,
so it's about the same length. It's
just that you said it's thinner
. Now it looks a little thinner
right now.
Ah, so I think if you really want to share it,
maybe ...
yes
, maybe there is no way to do it, there is no way to do it , unless your 13 Pro or 13 Pro Max
uses this kind of frame
and then when you want to upgrade to 14,
you If you go down and buy 14 or 14 Max
, maybe you can share the
frame . If you have other use cases, you
can't see any way to share it. How do you
feel after reading this? I'm
looking forward to the camera ,
looking forward to the change of the camera
and its bangs
Yes, because
we are now really sure about its camera.
Some people have said it before. It is
unlikely that
Apple will upgrade its camera
to 48 million pixels this time,
but I feel that
because in fact, what about the other two cameras?
Upgrading will not be the most important place.
I think Apple may
mainly focus on its
main lens. I think it is almost time
to upgrade to 48 million pixels.
No matter if they want the quality of the film to be higher,
they have to improve its pixel
quality. This time, I am looking forward to seeing how
Apple's main lens will improve this time. If you are talking about the
other two lenses,
will you ?
It's very commonly used, but it's
okay
, that's OK.
Anyway , the other two lenses are quite tasteless.
I don't expect Apple to
have a foldable periscope lens in the telephoto lens this time , which
can reach 5 times and 10 times. What
I don't think I dare to look forward to this
, but at least the main lens may
have obvious improvement in photography . OK
, then we will unpack this soap machine
for everyone to see
. What are your thoughts on these details? Want to discuss
or something you think I didn't mention,
want to ask me if you want me...
I don't know if I can have them for a few days
I'll probably have to send them back soon
but if it's still on hand do
you have any questions?
If you ask me, I
will try my best to answer it. Okay, how long did it take 17
minutes for today's quick unboxing?
I'm sorry
, OK, then we
'll be here first . See you in the next video, Bye