Hi, DIYers.
Joe here from Alarm Grid.
And today, we're going to show you
how to connect an August Lock Pro to the app
that you can download on your tablet or your smartphone.
The August Lock Pro is a really nice device.
It's a lock, obviously, that you can connect
to a phone or a tablet, but you can also integrate it
to your alarm system.
And it does actually have a Z-Wave module inside of it,
so you can interface it with that, too.
Today, though, we're just going to show you how to connect it
to your device to set it up.
One thing that you're going to want to make sure
that is on, though, before you start the connection process is
that you have your Bluetooth radio turned on on the device.
This is actually what it's going to use
to communicate with the lock and connect to it.
So let's begin.
I'm going to head over to the iPad,
and we'll just show you what this starting process looks
like.
Also keep in mind, we have already created an account
and set up the app.
If it's the first time that you're downloading the app
and opening it up, you're going to see the prompts
to create your account for the lock, which
you'll have to go through.
We have this on the FAQ for this video,
but for right now, everything is all set up for us
and it's ready to go to connect the lock directly to the app.
So let's see what it looks like.
So on my iPad, I'm going to click on my August Lock symbol.
And as you can see, it says, "Welcome to August!
Set up a new device," so I'm going to do that.
So we're going to set up an August Smart Lock.
I'm going to click that.
And the model that we have is the August Smart Lock
Pro, third generation, so I'm going to click on that.
We're not going to install the lock on the door
today, as we just have it sitting on the table.
So I'm going to skip this process.
I'm just going to connect directly to the smart lock.
So we're going to set up the lock, which we already have
out of the box and ready to go.
I'm going to click Start Setup.
Now we have to initiate the pairing process on the lock.
So on our August Lock, if it's brand new out of the box,
there's going to be a battery tablet which you can just pull.
What we're going to do is pop one of the batteries
out, put it back in, and then this little LED wheel
right here is going to turn green.
So if you press the bottom of it, the cover can come off.
It's got a little magnet.
I'm just going to pop one of these batteries out.
Put it back in.
Then pop the cover back on.
Now, the initiation process was very fast.
As you can see back on our tablet,
it already picked up the lock as soon as we did that.
So now we have to name the lock.
We can call it Alarm--
oops-- Grid Office.
And Lock Name?
Let's just say Test Room.
Done.
Going to click Continue to add in the lock.
Now it's setting up the lock.
So as you can see, it's going to update the lock's firmware.
It looks like we're good.
Click OK.
We don't need to calibrate it because it's not on the door,
so this whole process would really
be done if we actually had the lock installed.
I'm just going to close this for all intents and purposes.
And as you can see, we do have the lock showing right there
and the next steps to calibrate it are needed.
So had we installed this on a door,
we would go through these other steps
and this would configure the lock so it works properly.
But as you can see, it is connected to our app
and it is working just fine, which is what we want it to do.
If you do have any questions, though, about the August lock,
about how to connect it to your alarm system,
or what other features you'll be able to get out of this device,
feel free to give us a call at 888-818-7728,
head over to our website, www.alarmgrid.com,
or send us an email to support@alarmgrid.com.
If you did enjoy the video, feel free to subscribe.
And if you want to be notified when we post future videos,
hit the notification button below
and we'll send you an update when we do so.
Thanks for watching and have a great day.