- Mijo, shake it off.
(bubbling)
(beep)
Hey, what's up guys,
welcome back to the Chemical Guys Detail Garage.
Today we have the 2019 Jaguar in the shop.
It might look clean on the outside,
but under its hood,
it kinda had an incident where I think antifreeze
or they put it through something,
but it's completely dirty completely thrashed.
So, today I'm gonna teach you guys how to properly clean
your engine bay using zero water
and the one simple product which is nonsense.
(whooshing)
The reason why I love nonsense
because it virtually cleans anything interior, exterior.
It uses transparent clean technology
that is very tough on stains, but very soft on fabrics.
So, fun fact you could use on the inside of your car.
To begin this process, I'm actually gonna go ahead
and get tape so I give guys a hard 5050 line
since you see a crazy before and after.
Gonna tape it from the top to the bottom
excuse if it's crooked.
This is just for demonstration purposes.
I'll try to get it as close as a straight line as possible.
So, I'll go and apply it.
And after I finished cleaning the surface with nonsense,
I'm actually gonna go ahead
and use a water based dressing VRP
to rejuvenate the plastic and give it that new look
that it once had.
So, let me just go apply this onto plastic.
And then let me just go ahead and do this bottom portion.
No attempt to clean it.
So on the left side, it's filthy.
I don't know if it has cooling,
it has something on it because if I rub my finger on it,
it actually doesn't come off.
Its still on there.
So, I go and get my nonsense
and simply go ahead and spray it onto surface.
Nonsense immediately starts attacking all the grime,
debris that might be sitting on the surface
of the plastic or painted areas.
And to start emulsifying the dirt and having it pull off
she already starts seeing
that it just starts drizzling it off.
To reach hard-to-reach areas
we recommend using a like a little brush.
I'll be using the goat boars hairbrush
and I gotta simply spray nonsense into the bristles.
This is just gonna add extra cleaning powers
to clean up the pores of the plastic
and actually remove it completely.
So, simply clean it
and you already start seeing this brown goo
that starts coming off from foam
that is all the contaminants
getting released from the plastic.
And this is a cool thing that I like to do.
Because if you don't have access to water
if you live in apartment you can still keep your engine bay
looking clean at all times.
So, simply just go ahead and scrub it out
and add as you go.
If you need a little bit more product,
simply spray more onto your brush
and just start scrubbing.
(scrubbing)
This is why I love Nonsense
you could use it anywhere.
It's odorless, scentless has transparent,
clean technology that will basically take care of anything.
(scrubbing)
If you do have electrical components that cannot get wet,
be sure to cover it up.
You don't wanna go ahead and get Nonsense in there.
But in most occasions on newer cars,
its completely covered with plastic
so you'll be perfectly fine.
(scrubbing)
I'll go ahead
and clean it.
You might start seeing Nonsense drying on the surface.
That is fine.
If it dries up on you
just simply go ahead and get a clean microfiber towel
and wipe in one direction
and with a single wipe of Nonsense,
you already start seeing this grime come off.
(wiping)
So, I'll go ahead and clean up the whole
left side of the engine bay.
Giving us a quick time lapse and I'll see you guys in a bit.
(upbeat music)
So, now that I finished cleaning up
the engine bay with nonsense it's time to protect it.
The dressing I'll be using today is VRP.
The reason why I picked VRP
is because it's a water based dressing.
It does not accumulate dust
and it adds a very nice sheet of shine.
VRP can be used on vinyl, rubber and plastics,
both interior and exterior.
So, before you apply these products,
simply shake up the product to mix it in,
then you could go ahead and apply as you need.
I like to go ahead and apply two lines.
Now you go and blush out the product
to go ahead an even coverage on the whole plastic.
And just simply massage it side to side
and VRP instantly attacks the pores of the plastic
and gives it a very new look to it.
Like I said VRP can be applied on vinyl, rubber
and plastic both interior and exterior surfaces.
A little bit goes a very long way.
With those two lines, I did half of it.
So now I'm gonna go ahead
and dress up the whole entire engine bay.
And then I'll show you guys the before and after.
Time loves Jason.
(upbeat music)
Once you finish applying VRP,
what I like to do is simply go ahead
and get a clean microfiber towel
and just wipe off any excess
that I might have left on the surface.
This is just so I could go ahead and make sure
that I don't have any runoff all over engine bay.
It's clean, its crisp, and then also fun fact
if you guys do not like the shine that VRP delivers,
simply wipe it off and it gives them
more of a OEM sheen to it.
So, you actually control the different shine levels
with VRP with a simple wipe down.
So, simply wipe it down.
And this is why I told you guys I love VRP.
If I rub my fingers on it, and I rub it on,
it's not oily, it's tried attach.
So, something lands on it like dirt, grime, debris,
it actually want sit on the surface and turn like that.
It's 'cause they clean it for longer
and it could be easier to maintain in the future.
So, simply I go put my towel down,
my VRP down and my applicator
and I'm assuring you guys of 5050.
Share that 5050 with just a simple application
of nonsense and VRP.
Let me go ahead and clean up that little line
right there so you guys can get a better 5050.
So, let me move my items up the way
and all I'm gonna do is grab my finger
and just dab it, just it could dry up.
And you guys can see
the crazy 5050 before and after.
This honestly took less than 20 minutes to do.
In this video, you can see that I've done in three minutes,
just because of time lapse
but less than 20 minutes
you could do it anywhere
before rising coffee, at a car meet, anywhere you go.
You go with a clean hood.
So, you guys liked this video.
Don't forget to give it a big thumbs up,
comment down below.
Let us know what kind of videos you wanna see.
And we'll see you guys next time
right here at the Chemical Guys Detail Garage.
But wait, is your engine bay clean?
If so, prove it to us
by tagging us @ChemicalGuys
on Instagram or Facebook or Twitter.
And you'll have a chance to be featured on our page.
This is Henry, we'll see you guys next time.
Right here at the Chemical Guys Detail Garage.
(upbeat music)