Welcome to the official UltFone Channel.
Many Apple users have recently faced a common problem regarding the iPhone getting stuck
at the Apple logo during a reboot.
This may be due to a malfunctioning device or an error during an update.
But you don't need to worry, as in this video, we'll show you how to fix the problem with
or without using iTunes.
Let's move to the first way.
Way 1: Fix iPhone Stuck on Apple Logo by Performing a Force Restart
Follow the instructions as shown to force restart your:
iPhone 6/6s or earlier, Press and hold the home button and power button
until apple logo appears For iPhone 7/7 Plus,
Press and hold the volume down button and power button until apple logo appears
For iPhone 8 or later, Quickly Press and release the Volume Up button.
Then Volume Down button.
Finally, keep holding the Power button until the Apple logo appears.
Well, if force restarting didn't work for you, here is another method.
Way 2: Fix iPhone Using iTunes.
For this, you will need a USB cable and a computer, and start by putting your iPhone
in recovery mode.
As we did before, For iPhone 8 or later, quickly press and release
the Volumn Up and Down button successively.
Then, press and hold the Side button until you see the recovery mode screen.
For iPhone 6, 7 or earlier, keep holding the respective force restart buttons until you
see recovery mode screen.
Get your iPhone connected to iTunes with a USB cable.
As soon as the phone gets detected click Update on the prompted window that comes on your
iTunes.
Confirm your actions and iTunes will automatically update your iPhone.
However, if for some reason you can't update your phone, you can also fix your iPhone by
restoring it to factory settings.
Reconnect your iPhone and this time choose the Restore option.
Please Note: restoring will erase all the data on your phone, so make sure to back up
your data in advance.
Confirm your actions and iTunes will automatically restore your iPhone.
Upon completion the device would reboot to the home screen.
Now I guess most of you guys must be wondering, is there a way to fix the issue without losing
data?
Well keep watching and you'll find the answer.
Way 3: Repair iPhone Stuck on Apple Logo Using UltFone iOS System Repair [No Data Loss]
First of all, download and install UltFone iOS System Repair from its official website.
Launch the program and click the Start button under iOS System Repair
Now, connect your iPhone to the computer with a USB cable.
Then, select Standard Repair mode and hit the button in the center.
You will now be required to download a matched firmware package for your iPhone.
To get it, hit the Download button.
The download will take a few minutes.
For faster downloading, ensure that your computer is connected to a high-speed network connection.
Once the firmware is downloaded, click "Start Standard Repair".
It will take a few minutes to repair your iPhone.
After your device gets repaired, click "Done".
That’s it.
Now your iPhone will reboot and get back to normal again.
That was all about how to fix iPhone stuck at Apple logo.
Thanks for watching.
If you find this video helpful, don't forget to give it a like and subscribe to our channel
for more useful iPhone tips.
See you next time!