What's up, guys! Remember a while back,
I cut a bottle into a string, and then you weave a rope out of it?
Well, I had to build it myself. Now they actually built a gadget, just on that concept.
Let's see what it's all about!
As you can see, it's a handle right here,
And you can adjust how much you wanna cut your plastic bottle.
I'm going to say one centimeter.
Okay, I got a plastic bottle. What we're going to do is just grab a knife, and cut off a piece.
Try to make it straight as possible.
'Cause that way, it would be much easier later.
And let's see how this work, you put it in into the bottle
(weaving plastic)
There you go! And then you just pull it through like this
AHH, NO!
Let's try this again. Start it out like this and keep going. I think it only works like this.
You really have to hold it like this. You can't really pull it through other ways.
It cut off their own way, so you kind of have to push it forward and side.
Forward and side. Other than that it kind of does not work that well
But anyways let's try this again.
(weaving plastic)
There you go! It kinda works for some reason
(continues weaving plastic)
Kinda comes off sometimes, you see what I'm saying?
Arrgh!
Definitely not the best cutter because it comes off like this. Okay, let's try this one more time.
Hopefully it will work now
Usually when I did that DIY one, it was pretty easily to cut a bottle.
You just pull it on this string, but if you pull on a string, it just doesn't work.
So you'd have to hold it like that to grasp this bottle.
Without it going to come out.
(weaving plastic)
Other than that, if you pull on this string, what happen's it just flies away.
Okay, let's see. Oh nice, it works now.
There you go, look at that!
(weaving plastic)
There you go, now it works!
You kind of just have to pull it towards this way, so that way, it actually does what it's supposed to do.
Nice.
Looks like we came to the end. Now we can come cut it off.
(cutting off plastic)
There you go
Sweet, and look at this plastic bottle. Now we can weave it together and make a rope out of it.
Or if you need to bind something together, that's perfect.
There you go. It works when you hold it like this and cut goes this way and you pull it through like this.
Then it works well. Other than that it kind of comes off.
So you just gotta use this gadget right for it to work.
That is a really, really thick bottle, so they will feel a bit much thicker, too.
(weaving plastic)
There you go, it just got too thick over here.
As you can see, if you hold it the right way
It works really easily. And look at that we have a really strong rope
If you pull it together, it does not beak that easily.
Especially if you tie something around many many times.
And make a shelter out of it. No problem. So as you can see it is a good idea
But it does not work every single time
(weaving plastic)
There you go.
Nope.
(continues weaving plastic)
There you go, that works. It's so weird though. Sometimes it works and sometimes it doesn't.
But for me, it's the best to hold it like this.
And then it cuts really well.
I think the problem is inside over here. The blade is 90 degrees.
I think it should have been tilted a little bit. So that way it actually bites in into the bottle, and then it slides out.
And cut off the short pieces. It kind of works if you're holding the pressure out the perfect way.
It will work, but a lot of times it will make these small pieces
And it's really annoying. You wanna have a really long, one piece like this one.
You probably can make your own that works a lot better.
This one works, but it could have been a lot better, a lot easier to use.
Anyways, guys
That's pretty much it. Thank you for watching. Don't forget to subscribe, thumbs up this video, and I'll see you next time.