Double Chin Removal Have the customer half lay back on the bed:
wipe the chin Remove double chin with laser pad: (Remove
excess fat on the chin, tighten the skin while removing the double chin)
Fix the strap from the chin to the top of the head
Fix the small laser pad on the chin (Use 2-4 laser pads according to the treatment area.)
Adjust the parameters. It is suggested to adjust the energy to 80%~100%, the time to
20~30 min, adjust the mode to M3, the laser light will flash fast, click to start operation,
and wait for 20 minutes. Three laser pad modes:
Mode M1: always on, suitable for thick fat and those who opt for general weight reduction.
Mode M2: slow flashing, suitable for consolidating the effect.
Mode M3: fast flashing, suitable for thick fat and strengthening weight loss.
Note: Do not use when the chin is allergic, wounded, or just had liposuction, lipolysis,
or other implants. Remove the laser pads and strap.
End
Weight Reduction Wipe the arms with wet towel
Shaping arms with laser pad: (dissolve excess fat on the arms, improve jiggly and flabby
arms) Fix the straps on both arms (When fixing the
straps, make sure there's still enough room for laser pads)
Fix the big laser pads on both sides of the arms with excess fat. 2-3 laser pads on each
side are suggested. Adjust the parameters. It is suggested to
adjust the energy to 80%~100%, the time to 20-30 min, the mode to M2, and the laser light
will flash slowly, click to start operation, and wait for 20 min.
Three laser pad modes: Mode M1: always on, suitable for thick fat
and those who opt for general weight reduction. Mode M2: slow flashing, suitable for consolidating
the effect. Mode M3: fast flashing, suitable for thick
fat and strengthening weight loss. Remove laser pads and strap
End
Wipe the waist and abdomen with wet towel Shaping waist and abdomen with laser pad:
(Remove excess fat in waist and abdomen, reduce lumbar and abdominal fat.)
Fix the strap on the waist and abdomen. Adjust the parameters. It is suggested to
adjust the energy to 80%-100%, the time to 20-30 min, the mode to M3, and the laser light
will flash fast, click to start operation. Remove laser pads and strap
End
Front-leg: wipe the legs with wet towel. Shaping legs with laser pad: (Remove excess
fat in the legs.) Fix the straps on both legs (When fixing the
straps, make sure there's still enough room for laser pads)
Fix the laser pad on both legs with excess fat.
Adjust the parameters. It is suggested to adjust the energy to 80%-100%, the time to
20-30 min, the mode to M3, and the laser light will flash fast, click to start operation.
Remove laser pads Rear-leg: wipe the legs with wet towel
Shaping legs with laser pad: (Remove excess fat in the legs.)
Fix the straps on both legs Fix the laser pad on both legs with excess
fat. Adjust the parameters. It is suggested to
adjust the energy to 80%-100%, the time to 20-30 min, the mode to M3, and the laser light
will flash fast, click to start operation. Remove laser pads
End
Wipe the back with wet towel Shaping back with laser pad: (Remove excess
fat on the back, reduce excess fat and improve loose and saggy skin)
Fix the straps on the back Fix the laser pad on the back (Use 4-6 laser
pads according to the treatment area.) Adjust the parameters. It is suggested to
adjust the energy to 80%-100%, the time to 20-30 min, the mode to M1, and the laser light
will stay on, click to start operation. Remove laser pads
End