[Music]
this will be a quick start to Autodesk
fusion 360 it's a solid modeling
application so it's a great way to
prepare data for origin first up we're
going to check document settings or this
is a new file it's called untitled
whenever you start fusion it kicks off
for the new file under document settings
we'll go two inches and then I'm going
to turn on the origin this is nothing to
do with shaper origin this is a 3d space
origin this is this point where all
these coincided is zero zero zero in 3d
so I'm going to select this plan you'll
notice up in the top right is the view
cube so this is looking from the top
down so if you were working on a panel
of ply on your workbench this would be
where you would cut from so this is the
top of it so we're going to create a
sketch for most 3d operations in
infusion you start off with a with a
sketch and you can see that down here
and you can see I'm in sketch mode so
we're going to create a rectangle and
I'm gonna click here you see I'm
snapping to that zero point and then
start dragging this I'm gonna make it 2
inches high you see that I got the
y-axis highlighted get 2 and then hit
tab to go to the width and go 4 inches
for the width so the idea here is we're
going to make a little 2x4 panel that we
want to cut out of plywood so we're
going to assume our plywood is 1/2 inch
thick so I'm gonna go extrude and choose
0.5 because I changed the document units
to inches that I need to put a unit in
hand and you'll notice it's creating a
new body so we go okay you'll notice
when we extrude it we lift sketch mode
as sketch got hidden it still exists I
can turn it on again it just got hidden
and we made a new body
body 1 it's gonna call it test 2 now it
is ready to export so I'm just gonna
hide this origin so I can select the top
face so I can confirm that I'm looking
at it from the top over here and then I
just hit the export to shaper button so
this is that we a link down below to the
video showing how to install this added
so I select my top face and by default
it exports one body at a time we'll get
into the more advanced features later so
just two SPG's so we know it takes the
name of the body and uses that so we'll
go save so that's all exported now color
coded and everything so we'll just have
a quick look here so test 2 is 4 inches
by 2 inches and it's a black filled
solid so that's ready to cut on the
outside of this line just by dumping it
on a thumb drive and putting it on
origin ready to place oK we've taken
that file and dropped it on a USB now
we'll plug that in the side
we're in design mode we've scanned in
our workspace I'm just gonna hit plus
route us browse on the USB find the file
we just made and now I can position that
wherever I like this is a cut exterior
shape because it's black so we'll see
when we go to cut mode you'll see this
tool path pop-up on the outside so
you'll see yeah
as we hover over it we're gonna cut on
the outside of that line so I'll show
you with a air cut with a quarter inch
cut up just how straightforward it is to
cut this so if we were not doing an air
cut this would literally be all it takes
to to cover this quarter of an inch deep
you do a couple of passes maybe three if
you're wearing precious and that would
be cut out of a half inch panel apply
that's a simple flow if I had to get
data to origin and cut it
you