all right so you got your fan fan shroud assembly mounted here
what you can do clean this up you can take some acetone or lacquer thinner
soft cotton rag wipe it down
you can use some chrome polish on it start giving a brilliant shine
we're going to show you here in alternative give you a nice brushed
finish some stuff you already have sitting around the shop
red scotch-brite wd-40 some gloves
let's do it all right with the fan removed now we're going to go ahead and
show you how to do this South brushed finish
all right what you want to do is start here
any of these edges here they have on the 45 go ahead and give two passes straight
down and you see making sure people wd-40 on your bracelet pad also trick to
making this look good
i'm going to start on the bottom here you don't want to skip and stutter you
don't want to just randomly you know making an omelet here but we're trying
to duplicate is what a machine would be doing the metal finishing process
so from one side to the other straight long strokes
we got the bottom you're going to see if we're going to do the same thing to the
top here given medium pressure setting the abrasive of the pad do the work
keeping the lubricant on there which is gonna go right across
I do have a couple scratches up top here better
coming right out with this here we can go ahead just overlapping about fifty
percent at the pad
ok
yeah
all right home stretch
yeah
it's gonna give one more once over
what you want to do with your rags here just trying to get a majority of this
wd-40 for here
now i'm going to use a little acetone get this locally East but also sells at
our retail outlets
it doesn't evaporate flash of quickly so is replace the cap will tip there and
here's where we're going to get our nice finish
and that's your brush finish is to give a contrast against the black
yeah
all right hope that tip helped you out
don't forget to visit eastwood.com for you try flow radiator before you start
having overheating issues
yeah