Hi, this is Jeff Wong with Expert Village, and today we're going to learn the basics
of maintaining your vehicle. In this next segment we'll be looking at the spark plug
wires and the spark plugs themselves. So, in most vehicles you'll be able to find the
spark plug wires as the group of wires that go into the engine; usually in a group of
four or six or eight. So, if your wires are exposed, what you can do is a basic check
and make sure all the wires are firmly secure in their place, you can do this by just pushing
down on these wires and checking and making sure their secure. And also check on the other
end, where they go into the distributor cap and give them a little push and make sure
their secure. So, checking the spark plugs themselves is a little bit beyond basic. It
involves a little bit of tools, and if you don't feel comfortable with removing you spark
plugs from your vehicle you may want to bring it in and have them checked out. So, we'll
go over the steps to removing a spark plug. So, you have your basic ratcheting wrench
here, with the extension on it because the spark plugs are usually deep in the engine.
And this is a special spark plug socket. Inside there is a rubber washer so that when the
spark plug becomes loose after you taken it out the rubber washer will grab the spark
plug and enable you to pull it out of the engine. So, lets demonstrate by taking one
of these spark plugs out. So, first we firmly grab one of the spark plug wires and we pull
up until it pops out. So you can see they are pretty long. So, if you look inside you'll
be able to see the spark plug. So, take your wrench and slide it in; it should be noted
that different vehicles have different size spark plug holes so find the socket that corresponds
to your vehicle. So, turn in a counter-clockwise fashion until the spark plug breaks loose.
Some of these may be rather tight if they haven't been changed before or if they've
been sitting for a long time. So, you unscrew the spark plug, like a regular screw and once
you feel that its become loose, you can pull up on the wrench. As you can see the socket
has held the spark plug in place and taken it out. If you examine the tip of the spark
plug, it should be a grayish-white color. It should be clean from any oil. If your spark
plug is wet, dark black or any other strange color besides this, there is probably something
wrong with your engine and you may want to get it inspected. So, now since this spark
plug is okay and this car has been running fine, we'll assume that the rest have been
running fine. But, for yourself you can check all the spark plugs. So, to replace the spark
plug, we simply reverse the process we used to take it out. So, we take the socket, make
sure the spark plug is secure, and we slide it back into the hole. And what I like to
do is I like to remove the wrench actually in this initial stage, and finger tighten
the spark plug. Now what this does, it insures that the threads are lined up so that when
I tighten with the wrench I'm not stripping the spark plug or the hole on the engine;
which could be a costly repair. So, once the spark plug is snug or finger tight, I take
my wrench and I tighten the spark plug. So now that the spark plug is firmly in place,
take the spark plug wire and I place it in and I push it down; and you should be able
to feel a click when the spark plug wire snaps into place and attaches to the spark plug.
Be sure all your wires are nicely aligned and you?re done. So, as a note when tightening
your spark plugs, you may want to use what's called a tork wrench; and what this wrench
does, it has an adjustable amount of force and it will actually slip when the amount
of force you dialed in is reached so that when you install your spark plugs you don't
over tighten them. So, you can check on the spark plug box for the corresponding tork
specification for your vehicle.