This video is brought to you by us,
RealPars!
Join the top 1% of PLC programmers.
Learn from the world's best so you can join their rank.
Head on over to realpars.com and start learning now
In this video, we're going to introduce you to a very common device
used in process control today – the Temperature Transmitter.
We’ll discuss the sensors used with them,
and show you how they are connected in a typical control loop.
We’ll also give you an insight into how they are calibrated.
Temperature Transmitters are available in all different shapes and sizes
depending on the application and environment they are expected to operate.
To name a few, there are:
DIN rail mounted temperature transmitters
Field mounted temperature transmitters, and
Hockey puck style temperature transmitters
Before we look at a Temperature Transmitter in detail,
let’s look at where it fits in a typical process control system.
A Temperature Transmitter is a device
that converts the signal produced by a temperature sensor
into a standard instrumentation signal
representing a process variable temperature being measured and controlled.
The most common transmitter instrumentation output signal is 4 to 20 mA.
The signal from the Temperature Transmitter is sent to a Controller
that determines what action is required and generates an appropriate output signal.
Controllers are either a PLC or a DCS in process control today.
The Heating or Cooling source exerts a direct influence on the process
as directed by the controller.
A Temperature Transmitter requires a power supply to operate.
Most Temperature Transmitters are 2-wire types having only two wires.
These two wires provide power for the transmitter and are also the signal lines!
A 4-wire transmitter has two wires connected to a power supply
and two signal wires connected to the PLC.
The power supply can be AC or DC depending on the vendor and model.
We haven’t said much about the temperature sensors,
so let’s do that now.
The two most common temperature sensors used in process control are the thermocouple
and the Resistance Temperature Detector, or RTD.
We’ve got lots of details on both of these devices in our other videos.
Later, we’ll tell you where you can find these videos.
The thermocouple produces a change in voltage with a temperature change.
Thermocouples have only two wires.
An RTD produces a change in resistance with a temperature change.
Unlike a thermocouple that has only two leads,
an RTD can have two, three, or four leads.
It’s common to see Temperature Transmitters
that are capable of working with either an RTD or a thermocouple.
You may have heard the term "Digital Temperature Transmitter".
This term has been around for a while now and its meaning is evolving.
Historically, a Digital Temperature Transmitter was a Smart Transmitter.
The SMART transmitter is an intelligent transmitter
that has an analog output of 4 to 20 mA
and also provides digital communication signal information
such as Instrument Tag Names, Calibration Data, and Sensor Diagnostics.
These SMART transmitters use HART protocol or FOUNDATION FIELDBUS or PROFIBUS.
As with any instrumentation transmitter,
a Temperature Transmitter needs to be “adjusted” or “calibrated”
so that the current output of 4 to 20 mA
represents the temperature range of the process variable being measured.
For example, a process variable temperature range of zero degrees Celsius
to 100 degrees Celsius will produce a current range of 4 to 20 mA.
In every calibration scenario,
the sensor is replaced by a device that can simulate the output of the sensor
over the entire process variable temperature range.
For a thermocouple,
the sensor is replaced by a device that produces a range of millivolts.
As you can imagine, it’s not easy to create these small voltage
For an RTD, the sensor is replaced by a device that produces a range of resistances.
Historically the device that produced a range of resistances was a decade box.
Today we’ve got Signal Reference Calibrators
that can output a variety of electrical signals
that can simulate RTDs and Thermocouples
making it much easier to calibrate Temperature Transmitters.
How are the actual adjustments performed?
Older style Temperature Transmitters
have multi-turn potentiometer adjustments called “Zero” and “Span”.
The Zero pot is adjusted to produce 4 mA
when the simulated temperature is 0%,
and the Span pot is adjusted to produce 20 mA when the simulated temperature is 100%.
As an example,
let’s calibrate a temperature transmitter connected to a Pt one-hundred RTD
assuming a temperature range of 32 degrees Fahrenheit to 100 degrees Fahrenheit.
We can get the resistance values at our calibration temperatures
from a PT100 table.
We will start with the Zero calibration.
As you can see in the calibration table,
a PT100 RTD has a resistance of 100 ohms at 32°F,
so we’ll set 100 ohms on the decade box.
The multimeter current should be adjusted to 4 mA
by rotating the Zero adjustment screw.
For Span calibration, we'll find the high range temperature on the table
and set the corresponding resistance on the decade box.
The multimeter current should be adjusted to 20 mA
by rotating the Span adjustment screw.
Newer style Temperature Transmitters do not have external Zero or span adjustments
but are programmed or calibrated using the software.
The Transmitter is connected to a computer via a serial USB connection.
This video wouldn’t be complete
if we didn’t talk about one of the newest trends in Transmitters;
the Wireless Transmitter.
As the name implies, the transmitter does not send its signal to a receiver via wires.
The signal is transmitted to a receiver via a Wi-Fi signal.
Once the signal is received, it can be sent to a computer
so readings can be saved and later printed or exported to a spreadsheet.
Or, the received signal can be retransmitted via wires
as a 4 to 20 mA signal to a PLC.
To learn more about temperature sensors,
you might want to review our videos called “What is a Temperature Sensor?”
and “Pt100 Sensor Explained”.
You can find the link to these videos in the description.
Let’s review what we’ve discussed…
Temperature Transmitters are available in several different shapes and sizes.
A Temperature Transmitter is a device
that converts the signal produced by a temperature sensor
into a standard instrumentation signal
representing a process variable temperature being measured and controlled.
The most common transmitter instrumentation output signal is 4 to 20 mA.
Most Temperature Transmitters are 2-wire types having only two wires.
The two most common temperature sensors used in process control
are the thermocouple and the Resistance Temperature Detector, or RTD.
Many Temperature Transmitters are capable of
working with either an RTD or a thermocouple.
Signal Reference Calibrators can output a variety of electrical signals that
can simulate RTDs and Thermocouples making it much easier to perform calibration.
Older style Temperature Transmitters have multi-turn potentiometer adjustments
called Zero and Span used for calibration.
Newer style Temperature Transmitters
are programmed or calibrated using the software.
A wireless Temperature Transmitter sends signals to a receiver via a Wi-Fi signal.
Want to learn PLC programming in an easy-to-understand format?
and take your career to the next level?
Head on over to realpars.com