D.C. is known for its museums, politics and iconic landmarks.
But there’s one that stands out above the rest: the Washington Monument.
This unmissable marble and granite structure towers 169 metres over the city’s notoriously
low-rise skyline and has remained an enduring symbol of the US for over a hundred years.
But, take a closer look and you’ll see that its bricks change colour here.
Now, that isn’t just down to bad cleaning,
it’s actually evidence of the complicated mess that was the monument’s construction.
This is the story of how an American icon almost never existed.
The Washington Monument is the tallest stone structure in the world. In fact,
it was the tallest structure in existence until the Eiffel Tower snagged its title.
Built with over 36,000 stones, its load-bearing walls are an
incredible 4.6 metres thick at its base but taper up to a mere 46 cm at the top.
Compared to many building projects it looks pretty simple. No walls of glazing,
balconies or trees. But building this 100,000-tonne structure was far from easy.
When George Washginton died in 1799,
a private society was formed to honour the country’s first president.
It began fundraising and selected architect Robert Mills to design a monument – a logical
choice given that he’d already designed the Washington Monument in Baltimore, Maryland.
His initial concept imagined a 182-metre obelisk
in a circular colonnade along with a statue of Washington and other war heroes.
But it was expensive – roughly USD $1M dollars – so officials decided
to start building the obelisk and deal with the statues later.
In the spring of 1848, excavation works began on the 2.3 metre deep foundation pit.
The footings were built using large blocks of gneiss rock
set into a mixture of lime mortar and cement.
A clever and efficient system of pulleys and cranes was used to create two layers
of walls using coarse white marble shipped from a quarry near Baltimore, Maryland.
Stone by stone, the structure climbed to a height of 46 metres.
But in 1854, everything came to a halt.
Funding ran out and construction was taken over
by the “Know Nothings” political party – yes that’s really what they were called.
Public support for the project dried-up and a few years later the Civil War broke out.
Half complete, the monument stood for decades as an ‘hollow, oversized chimney’ and was
mocked as a national embarrassment. It looked as if it may never be finished.
But when the Civil War ended, the committee began lobbying for funds again.
It eventually gained support from Congress and
the Army Corps of Engineers – but the challenges weren’t over yet.
Engineers were worried that the original foundations wouldn’t
support the weight of the finished structure,
so they added slabs of reinforced concrete to
the base, and the monument’s height was shortened from 182 down to 169 metres.
A newly-invented steam elevator was also installed to help carry materials as the structure rose.
While steel beams were eventually used to support the lift shaft,
the structural elements of the massive structure are entirely masonry.
Then, to make matters more complicated, the quarry where the marble was originally
shipped from was shut down. As a backup, the team sourced new marble from Massachusetts.
But the brownish colour of the new stone began to look out of place
and engineers quickly sourced the rest of the stone from another quarry in Maryland.
To save money, the statues from the original plan were never built.
Finally in 1884, the monument was officially completed and
it opened to the public a few years later.
Today, you can still see where the different stones were used – now
weathered by time – standing as a quiet record of the decades-long battle to build this structure.
Since its opening, the monument has replaced its steam elevators with
faster electric ones and installed glass walls and better lighting.
It even survived an earthquake in 2011. Afterwards engineers repaired several fissures throughout the structure.
Despite its turbulent birth, the Washington Monument has evolved
from a national embarrassment to an icon, and is now a revered emblem of America’s capital.
It stands tall above this most powerful of cities silently
watching a noisy history unfold: it’s seen presidents come and go,
enormous legislative and judicial decisions be
wrangled over and millions make their voices heard.
This remarkable structure is so much more than a monument to George Washington.
It’s a striking reminder of the disruption and horror caused by the American civil war,
a case-study in how challenging building in this country can be,
and a testament to what determined construction
teams can achieve when they believe in what’s possible.
This video was sponsored by Bluebeam, you can learn more about how their digital
construction tools are helping amazing teams around the world at the link below.
Don't forget that we’re inspiring the next generation of builders through our investment into Brick Borrow,
a fantastic LEGO subscription service.
You can learn more and get started today over at brickborrow.com.
And as always, if you enjoyed this video and you want to get more from the definitive
video channel for construction, make sure you’re subscribed to The B1M.