KEITH: I'm Keith Gipple with tactical Rifleman.com
we're here at t1 g training facility and i'm here with david ives for nemesis
arms and he's going to tell us about the Valkyrie ambidextrous precision rifle
DAVID: thanks for having me Keith appreciate it this here what we have here is our
Nemesis arms Valkyrie fits in a backpack
it's a world-first ambidextrous bolt gun and I'm going to go ahead and take it
out of the pack this pack can house everything in it from suppression to forints
to bipod it also could have ballistic armor in it so as we pull the rifle
apart or out to assemble it we can take the bolt out it has a packing instrument
inside for all this including suppression and then below we have the
rifle with optics on it so everything is compact pull it out set up the bipod
right here extend the sock out and it has two locations for shooting
application it has protective caps on it so you protect your receiver and your
barrel
KEITH: and this is a 11 pound system DAVID: right this is an 11 pound system and
it's actually multi caliber as this barrel goes on we can swap calibers from
243 to 66 5 3 more and 308 all housing the same mag and same bolt you just
switch the barrel
KEITH: excellent DAVID: and ammo of course
KEITH: it can use any magazine? is that right?
DAVID: well we we can our magazine our current magazine right now is a is a
standard 10 round mag double stack single feed and so this is the magnet
comes with this rifle system for all of those calibers right ok so when we do
this and we just put it in then we're good to go there with our bolt system
here we can introduce the right-hand bolt system so you have a right hand
functioning rifle and if you remove this this is the key with this rifle
system is now you can put a left-hand bulb in it and for different
applications for law enforcement military or hunting applications the
rifle being able to switch from one bolt to another actually gives the shooter
the opportunity to stay undercover wherever they're at
KEITH: and it's that fast
DAVID: and it's that fast it to do if we want to take this from this application process
most rifles are dragged around to track a target with our system right here we
have two knobs on the bipod and if we loosen the bottom knob we can actually
track from the bipod itself put it forward which is a front load on the
bipod system which now makes it the ability stiffens it up for your shot no
matter where you are at
KEITH: It's locked in forward mode
DAVID: that's correct the bipod will move you pull it back and
rotate it and lock it back in right so the nice thing about this too is with
this application we can do several things
most bipods are made to go up and so you have to find a higher angle if you're
going to go in on a target with ours if we come down we can actually put the
rifle down on a flat area and even if it's an adverse thing where we have
something like a rock or what-have-you your optics are off it's a bad shot if
you loosen the top knob you can actually put the rifle at an odd angle yeah
you're back on so you're back on target so now you can go up to different angles
all the way up to shooting off of a high elevation and then so you can track into
wherever you're at or follow the target for wherever you're at
nice its arsenal the rifle system will hold to wherever you're at if you want a
long-range shoot the rifle for more stability we can take the actual front
bipod off and then this device right here which is our four end it's a
free-floating four inch so it goes over the barrel nut and the bipod pin and it
allows you to put it here now this is a retention knot here as this Wiggles and
moves of course you don't want any of that because that's going to KEITH: mess with your accuracy
DAVID: that's correct so you push this into the the front here turn it
down it's very simple it's all hand tight so it tightens down you snap the
bipod back on the front you have sent all the same articulations with a bipod
now but now you're rusting it out further
forward right so your triangle is wider your stability is better KEITH: that's awesome
and that's almost the entire weapon assembled right there except for our
suppression DAVID: that's correct now if we spin this nut off right on the front
which is just a thread protector and the neat thing about our rifle system is
everything that we have we also do have muzzle brakes but everything you can
shoot through so you're never limited to ok this won't allow you to function the
firearm okay so and then with the suppression system we put this simply on
the front here and of course this threading on the front we can also put
on any quick-release devices or anything else it's all five eighths twenty fourth
right on all of our barrel
KEITH: okay so one thing I noticed it's unique also is we
used absolutely no tools to assemble the rifle
DAVID: that's correct our this is a truly
tool-less rifle where a lot of people say it's to list which means you only
mean an allen wrench or some type of a spanner wrench or what have you
our rifle is all assembled by hand it loses no accuracy it repeats every time
and it's the way we've engineered it KEITH: that's awesome because we all know that
when you need that tool it'll be missing DAVID: that's correct KEITH:and in the field that's
no good DAVID: that is correct and what's even worse is if you're running and and
you're you're everything's apart you can't assemble it so hey that would be
tragic and with our stock assembly here the nice thing is is this will collapse
in for for packing away but if we want to take this apart we can also take it
apart we have a bracket that goes on the back that will allow you to put your
favorite AR stock on it so we can put Magpul vltor or anything you have we have
a bracket that goes to it as it goes to a buffer tube that's great yeah so it
just it makes it very portable and pliable a lot of times what we like to
say is it's a big boys lego set how do you want to build yours today
KEITH: that's great I also notice that there's two red marks here on the stock DAVID: and what this
allows you to do is adjust the stock for shooting positions the second red line
here is the normal standard length of reach for for normal folks shooting the
the front one here allows people to collapse it in for restricted areas as
far as a compressed areas and allows you to shoot
and then the two rear lines are to push the stock all the way in through for
transport and packing so the next thing that we need to do with this is tear
this rifle apart put it back in the backpack let's head to the range and
then reassemble it to show you that there's no loss in zero when we take it
apart and put it together
DAVID: time to go shoot what do you think KEITH: let's do it DAVID: alright