This is all really quite fine material
Looks like there is a lot of copper in it
We have
actually pillow cases on the two discharge troughs
To catch all the material
oh yeah, now we have the greenish
Resin and glass material of printed circuit boards
We have some lighter material flowing down here
We are looking for
Some of the heavier material to come out of these grooves here
Work its way across up to the upper cleaning plain
We've quit feeding and now there is some heavier material
hanging back the greenish
circuit board material
epoxy fiberglass is washing down.
some of the larger epoxy pieces are down here
and we are going to catch a good part of the copper
Most of this material here is
copper from the circuit boards
It's starting to flow down into the concentrates trough
We have some of the
higher specific gravity coming out of the upper grooves
We have some gold particles there
right there on the leading edge, look at that
Look right there at the leading edge
Right here at the leading edge is a bunch of fine gold
That looks just like gold out of the ore
It's all on there, all the way down
There's a nice line of gold there
That's very fine material as well
and behind that is I'm guessing that
well I don't know, it's hard to say right nowbut there is probably some
soder back in there
maybe some silver
Here is that gold line we were talking about.
it's pretty much all through here.
We are brushing down, this is all gonna go down right into
The high grade, concentrate hole, the number one hole we call it
It continues to move down the table and clean at hte same time
We have virtually all the fine gold
going down into our number one concentrate hole
or high grade hole
and it's a couple of safet grooves here
and some of some other heavy gravity material
and whatever gold overflows and we call that our number two hole
and that's where
95+ of the heavy specific gravity material will end up off this table
Now this is the pan of the
number one high grade concentrates off the table
of the first run of printed circuit boards
this is a nice gold line, really quite rich material
Compared to most ore that we run
and we are looking at gold that is really very very fine
200 minus mesh and
actually quite a lot of it, also in the pan the grey material you see
I'm not quite sure what that is, I suspect a good part of it is soder
lead, tin soder
we see a couple of stray particle pieces
but other than those, the gold and the grey
there is nothing else to differentiate at this point.