Hi everyone, you're on HowFixit. In this video guide, I'll show you
how to upgrade the Hard Drive on the iMac A1419 Retina 5K 27-inch Display.
This step-by-step instruction is applicable for iMac Model A1419 Late 2014, 2015 and Mid 2017.
To disassemble the iMac A1419 you need the following tools:
Screwdriver Set Torx T8 and Torx T10 Opener
Tweezers
Plastic pry tools Adhesive tape
I recommend using a magnetic mat during the repair process,
which is especially useful in case of the iMac A1419. Throughout this disassembly,
keep track of each screw so you can put them back in the right places - this will help successfully
reassemble your iMac A1419. And don't worry about losing any of screws, all of them will definitely
remain on the magnetic mat. In the description, I left links where to buy all necessary tools.
To remove the display on the iMac A1419 you need cutting adhesive using a tool
with a thin and flexible blade. This is the hardest part of iMac A1419 disassembly,
you need to do it as carefully as possible.
Insert the opening tool into the gap between the glass panel and the rear case.
Once you've inserted the tool into the case, cut the adhesive around the display.
Additionally,
you can remove the remaining glue with a thin plastic mediator.
Carefully turn the display towards you and while holding it,
disconnect the two cables from the main board. Don't worry the display
won't fall because the adhesive is still holding it to the bottom of the iMac case.
Tilt the display down and cut the adhesive strip along the bottom of the display.
The iMac A1419 Late 2014, 2015 and Mid 2017 has a 3.5-inch hard drive with a SATA
3 interface. You can install any HDD or SSD drive compatible with the SATA 3 interface.
In the description, I left a link where to buy a Hard Drive or SSD drive to upgrade
this iMac A1419 Retina 5K 27-inch Display. For installing a 2.5-inch SSD, you need an
additional adapter. Reassemble
Before sticking the display to the housing, I recommend checking how the iMac works.
Bring the display to the housing,
connect two cables, and fix the display to the back housing with adhesive tape.
Turn on your iMac and check; if everything works fine, move on to the final assembly step.
Remove the old adhesive strip from the iMac housing and display.
The best way for sticking the display is special adhesive strips for the
iMac A1419 27-inch Display. But also you can use double-sided adhesive tape for displays.
In the description, I left a link to special adhesive strips for the iMac.
This repair is complete, you were on HowFixit, and see you guys next time.