hey everyone and welcome back to the club. today i'll be showing you how to
draw Legio Deadpool. I'll be drawing this character standing straight forward
holding two pistols out in front so we start with the face
based on the little I patterns around the iso from left to right and start at
the top and just draw an angle line coming down toward the center
we're gonna leave a little tiny gap in the middle here starting on the right
side going to angle in writing towards the middle
now we're going to take these points rap down to the bottom of the eye and then
just do a curved up back up to that point to start at the top
going to curve the outside and then we're going to round out the bottom and
just come up to that point in the middle
coming up is right up to the middle do the same thing on the right side
starting from the inside
come down to the bottom making sure their lineup and going to curb back up
towards the top
I'm just going to start at the top and just curved back down
it's drawn the eyes so just along the center . and we're going to the left to
start an angle line do the same thing on the right side it's always easiest to go
from left to right just balancing things out as we go from the top was going to
draw a straight line across the top of the i am going to connect them outside
to the inside with a curve going down like that
ok now let's get into the head so i'm going to draw the rounded top first
so just above each of these points are going to draw a curve from left to right
it's coming across from here i'm gonna round up the corners handing them out
and come straight down just below this bottom line
let's draw two straight lines coming down and then started
I'm going to round up the body corners
and then connect these two points with a curve going down towards the bottom of
the chin down to the bottom and back up on the right let's draw that little peg
on top
so just on the left and right side we're going to add two straight lines to
Street short lines and then we'll connect those two points with a curve
across like that
we're here let's go down to the bottom and draw in the neck so from left to
right we're going to draw is basically the same with down here starting on the
left side
your current towards the bottom and curl back up on the right side now from here
we're going to draw on the top of the shoulders the body so right here on the
left side i'm going to draw an angle line coming out do the same thing on the
right side out now from here we want to connect those two points with a straight
horizontal line
so we're kind of looking down at the body on the shoulders like that
from here let's draw the sides of the body so from here the body actually
angles out a little bit to draw the body just amped about here
so from this corner on the left draw a straight angle line going to left
towards the hip and then on the right side will draw the same thing here
making sure that the same height
now we're going to draw straight horizontal line across just connecting
the two this going to drop this down so we're going to step over on the left
side in a straight line coming down and on the right wing is going to step in
that corner and then draw a straight line across now we believe that at that
for now let's go back up to the top and just block in the guns
so just on the left side you're going to draw a rectangle so right up here draw a
straight line first going down . to shorter lines from the top
going across and then from the bottom equal length on the sides and just close
this off google straight down to connect that in here just on the left side we
can draw a circle just for the muzzle you just want to touch that side that
edge of the rectangle going around back up to the top
now we just want to trace out the right side start from the top just to give it
a little bit of angle and perspective
I like that from this top . we want to make the gun looks like it's coming back
towards the body
so from this corner just want to angle down and in and from this bottle we want
to go up and connect those two points with a straight line so you can see that
I'm that little bit of space to the gun and the body here
let's go down here we're going to a little trigger so we want to do is on
started in middle on the left on the right side here
curve over towards the right do the same things are going to come up again to the
left side her over to the right and just connect the bottom corner from here just
going straight up
now i want to draw the hands and fingers wrapped around the handle so right here
in the middle of this little trigger occur over to the right a little bit of
space will curve over to the left
from here we're going to just draw a straight line tucked in underneath the
gun on both sides now here you want to draw on the handle
so just in here just straight like going down and then here comes straight line
coming down connected with a curve
now let's just draw the arm that's connecting the body to the arms so right
here
but halfway down this hand to draw an angle i'm going up toward the body and
then up here we're going to draw a straight line and sort of almost like
straight line going across and curve it into the shoulder
so it looks like the arms sort of stuck into the shoulder if you want to go and
run a little bit in detail here so on the right on this line draw a straight
line coming down and then left of that back line draw a straight line coming
down
well connect those two straight line going across ok so that's important is
we want to go with that gun in that arm
let's do the exact same thing on this side here so we just want to make sure
we're lining up things up enough to write so right here and draw a straight
line coming down 90 that up straight line across the top and then the bottom
will collect the sides
the street like coming down now you want to draw that muzzle starting up here to
draw a circle the side of that rectangle and then back up to the top go back to
the top and just draw this side over here we're going to draw in the angles
so let's draw the for the corn an angle in the bottom will angle down close that
gap off now all we're at it lets you might as well draw the little square in
there so I'm just going to draw straight lines on the back in front and just
connected with a straight line
let's go down to the trigger so starting right about here to pull that back we'll
go across and pull that up
I'm just going to draw a straight line here
now we can draw on the fingers so right there is right here
curve over to the left a little gap curve over to the right
draw a straight line from down on both sides close that gap off there now for
the handle
just dropped two straight lines down we just want to make sure were lined up at
the top and bottom round out the bottom of that handle
now here going to draw the arm going into the body and then up here
looks like it starts here and it's going to come looking down into that . there
so right here will curve and come down ok so we've got the arms
let's give it to the legs so in the middle here this little centerpiece this
piece that connects the legs to the body so on either side of the center and draw
two straight lines where he was going to close it off at the bottom of the
straight line
now let's draw in the inside back edge of the lake so we draw the legs down to
about here on this corner to the curve down to the left and from there we'll
come down towards the right now we're just going to start drawing in the
profile of the leg from this corner with an angle out towards the left on the
right
do the same thing and we'll start to build out the inside part blade starting
but with the height of the foot and pull that back in with the same
tangled line here and when curve this up to write about where that line is the
same light coming in like that so start to get a little bit smaller and then
from here
it's going to curve right into that . at the top and work our way backwards from
the right side will curve down to their curve just hang out and just draw an
angle line to the front of the toe
if you are going to do the reverse now we're going to go up this way show a
little bit of perspective from the bottom of the foot we're going to angle
up and take that same line that same angle and length and connect that corner
connect that corner and we're just going to work our way up there and we are just
going to connect these ends with a straight line on the bottom across the
top of the foot
now from here we're going to curve to there and then we're just going to round
out to that corner of that hip
so the same thing on this side so we're going to start with the bottom angling
up
take that same angle line going across the top of the ankle and then top of
this hip now we're just going to connect this with a straight line at the toe
straight line at the top of the foot and curvy like we did here on the left to
the top of that ankle and rounding out the hip
let's draw into the sword so I'm gonna have a sort of coming in this angle here
so we're going to do them to draw a straight line going across the back and
round out the end and then just throw all that same angle line going in
towards the back there is still that same thing on this side and draw it in
this angle so it's going to actually go into that jaw so right here that round
up the end of the sword and pull it in right into that shoulder that you're
going to start blocking in some detail so up here into this little crosshatch
pattern
the corner of the sword across this way the curve
we're just going to continue all the way down all the way down the sword
so we get to the very end now we're going to the reverse so from the top
right corner to go across until we create this sort of X pattern across the
sort of the same thing on the right side so crossing
here and going back up to the top on the opposite side and just hitting the
middle point between the ends all the way across like that
now the swords crossed behind the back and sort of folks up this way so i just
want to draw the end of the sort here starting with the straight line and from
this point to the curve in behind the body
let's do the same thing on this side starting up here during an angle line
and then from here we're going to curve to the tip
let's draw a little bit of detail and body so I'm going to start with indie
here so there's a little pouch thing on the knee
so from here I'm going to draw a line on that same angle at the top you draw one
at the bottom and connect those two points with a curve going to split this
in half
now the top corners from this corner to the middle is going to a little car like
this car that comes down in the bottom a little pouch will draw a little circle
inside and we just split it down the middle on the side here going to step
down on the top go across and the bottle step up
go across connect those two points with a curve now here to drop a couple little
rivets on the top one on bottom on the hip here this little thing that comes
down so unless I'm going to step in a straight line up and go across and it
will come down the bottom here you take that same . curve down
we're going to go across and then it says short lines half a length from this
corner to that corner which the curb and connect them
still the same thing on the right side so if you're going to go straight line
down
we'll go across the top and down the side on the side here we come down here
now we're going to go across about half the width of this line and it will
connect to the top up here we're going to draw in the belt so we start with a
buckle first starting with the circle in the middle at the bottom around like
that
now in the middle here going to have two vertical lines not touching the top or
bottom going to be a little
that I'm going around the side on the left around the side on the right now
we're going to draw on some eyes
so we can draw angle line on the left and on the right now we're going to take
those two lines to the top and bottom will curve to connect those and in the
inside here is going to color them in black
ok from here we're going to go work our way out words we do some couches similar
to what we did on the knee here so if you look at the center of this circle go
across we're going to draw an angled line going across the top make sure this
roughly the same height as the buckle go across the bottom of this little bit
longer
we're going to angle down and connect the top and bottom here going to split
this in half so it's what we did here and draw little pouch the two curves got
two buttons and a line down the middle
do the same thing on the right side so here we're going to start at the top and
the line down to the bottom will go across the bottom across the top and
connect the top and bottom split this in half
kick those two points with a curve on both sides and draw on the rivet now in
the middle of this curve was going to draw two lines coming down now we're
going to connect these approaches to the buckle so at the top you're going to
step down to a angle are horizontal I'm going into the buckle on the left and
right and then at the bottom as well so we're just going up a little higher than
the bottom of that couch and a long as belt
all you need to do is just draw a couple vertical lines split up
now we're going to work our way up to the chest detail so from the top corner
here going to angle down into the top of that pouch coming down like this and on
the right side now we're going to do two horizontal lines coming towards the
center but we're going to dip it in as we get towards the center
so we're just going to start by drawing two horizontal lines making a gap in the
middle here now from here we're going to curb in towards the middle on the left
and right now from here I'm going to draw in the side of the chest
details up here and curve around and go up in an angle going to come down an
angle so it's almost like a half square
they're going to come back down an angle towards about halfway between this line
in this line from here I'm going to go across and then i'm going to curb up
right in line with that top . there from here
I'm just going to go about halfway along this line and just angle this into the
belt now they're going to do the same thing on this side so we want to start
with a curved first starting up here
curr around go up an angle to the top . and come down and angle to that bottom .
coming down an angle lighting up with this line here
now we just want to take this line curve around and go horizontal here i'm just
going to draw an angle line right into that belt buckle
we can draw on some great detail here so from here
stop curve but halfway along this curve and draw another overlapping curve and
then in back behind here i'm going to draw to her is going right into that
line to the same thing on this time
so coming up halfway along this line curve down and in the back here we can
go out to curve lines like this and that is pretty much it
there we have it there's a Lego Deadpool i hope you enjoyed this lesson
thanks for watching and we'll see you again soon