OK.
This trick is an easy way to get 22 tiles of height.
You'll need a Jumper, a Zipline, and a Spinner.
We'll stack up.
That's 21, and that's 22 height tiles equivalent.
OK.
Now we're going to put a clear plate on top.
Let's put that up so we can see.
OK.
What we're going to do is we're going to take one end off of the zipline.
Put this end down through the middle hole.
And put it so it's sideways, like that, in the jumper, in front of the trigger.
Then put this on top, so that the zipline goes through the middle.
Now I'm just gonna put up some tiles to catch the marbles, so they don't roll off.
OK.
Let's load our marbles.
Here we go.
So the Jumper pushes up in the middle, and lifts this just enough to launch the marbles.
I would suggest a low speed for the marble down here, just so that this doesn't kick
all the way off, and something like that happen.
By the way, there is plenty of room to set this.
Lift it up a little bit.