all right get away from the knife making for a minute and what I want to do is
sharpen my beard trimmers they will barely barely I cut my own hair since
there's not much of it and whatever length I cut my hair I generally trim my
beard the same length and these are the blades that come off it and it's just
about to the point where I either got to buy more blades which you can but
they're just about as expensive as a whole new beard trimmer so I'm gonna try
sharpening these and this is the cutting end this is the other cutting end and
what they do is with vibration they they go back and forth against each other
like this and the hair comes into these little grooves and this thing cuts them
off and what happens is the edges get dull here and here until the more light
on that so what I have is some 400 grit sandpaper wet dry and I'm gonna try see
if I can put an edge on this and if it works
my wife has some dog trimmers that I would do because they're about the same
they don't they don't last long so let's just see I don't know if I'll give you a
good look at this right here
well I'd say what I see an immediate difference just that little bit I'm
gonna do it a little more and do the other the other little piece put it back
together and I'm gonna see if it will cut my wiry hair I've had a lot of
barbers back when I had hair I had a lot of barbers complaining about my hair
being so thick and wiring oh I miss those days
well I'll tell you that might work let me see where it's hitting if it's
hitting the right spot oh this is a piece of glass by the way because you
got to have a completely flat area to do this on
I wanted
not sure if it's hitting that teeth at the right angle I think it is it's
really shining so I think it is alright I'm gonna put this back together and I'm
gonna try it on my my brillo pad beard and if it works I will let you know no
I'm not gonna make you watch me shave in a minute yep cook my beard
cut my hair mustache works good I'm gonna do I have like four dialed
Clippers of varying degrees of dullness and affection do all them it's real easy
to get them blades off just a couple of screws a couple of Phillips head screws
they pop right off so you can save your Clippers with just ten minutes of
rubbing on a piece of 400 grit sandpaper thanks for watching y'all you know
you're in over your head with debt with credit debt when you get a bill for 20
cents they spent more mailing it to me then I owe them