to disassemble dog shocked for you'll
need p0 screwdriver and plastic spudger
remove screws from the bottom of game
pad in the description of this video you
can find links to new game pad battery
and this assembly tools pray up game pad
case near f1 spot next you'll need to
pry up the case near left and right
triggers and now remove button case of
gamepad while removing bottom case
you'll need to remove the Clyde F is the
cable now remove game pad battery next
remove battery securing area remove
screw that secures mainboard remove dish
pad cable and now mainboard can be
removed
also sticks can be removed from
mainboard clean mainboard with cotton
swabs in the description of this video
you can find links to new gamepad
battery and disassembly tools
if some button don't rock push each time
you can try to recover its functionality
with graphite pencil it won't grant you
100% efficiency but mostly it helps
now start to assemble the bad place
mainboard to its place connect each pad
cable to mainboard secure board with
screw now place better secure area on
mainboard
place better to secure an area and
connect it to mainboard
connect backlight cable to mainboard
take attention the way that cable must
be connected if it be connected upside
down the Clyde won't work
gamepad bottom case must be installed
starting from upper edge where left and
right triggers placed now check if
something would interrupt snapping of
the bottom edge of gamepad case if there
is not snap it
now when gamepad case fully closed
check if gamepad works by pushing the s
button and watching the backlight
indicator if it's all right secure case
by tighten screws if you need to replace
sticks
orekhova gamepad buttons functionality
which are the videos on this channel
you