Hi everyone how are you I am Teacher REYNER again we are doing another
exercise to learn to handle the logo logo simulation software
soft comfort for micro micro plc of the sim mark on well let's be
working we will make a new exercise I'm going to from an exercise
I already have this platform Now what I have I am going to open a
existing file this is the exercise we did in the
previous video well let's go to take it out let's extract it to have it
here on the platform here we have our component tree and here then
we have the exercises right now so let's make a new file
and although we can reissue this but let's make a new file this is going to
be well you name I can't think of
what name to put good I can leave it if you left it blank let's do a
white for you to see that if is created anyway we will pass it
with because I want to remind you that I I will be working here and the way
programming language which is the one we will be teaching there is already another
programming language we haven't sealed because here it's not that popular in
the region where we are living without However, if necessary, we do it
so here we have
let's make a copy of the previous one for you to see that one can
copy and can transfer the program where you want to have it
we are going to leave it here in this case this is going to be our exercise number 3
and for this we are going to we are going to reedit the header and well let's
let's light the three lamps pilots we will always make the
same way the situation now going to pose is that good when you press start
all three lamps are lit but here we will use a timer then
the purpose of this video is to explain how the timer on delay works
then this one we are going to put here the press start the lamps come on
after we will put some time after after five seconds
I only have uppercase it goes down after five seconds we are going to
put that time after five seconds and good to press stop at
the lamps will be seen to pay then around here we already have it
if we want to change here and this then what we can do
Well, first we have to enter its properties and we can put size
24 in case you want to see a a little wider then we will
put over here since there in other videos I have seen
that the letter is too small then we must extend three lamps
pilot when pressing start the lamp turn on after five seconds at
press stop the lamps already pay so here we must use a timer
and here in our tree of elements in functions here we will find the
timers in reality here we have around many
timers and we even have stopwatch on watches without asynchronous two
weekly timers are processors in short because this is this
logo is very widely used for use home automation we can use it
to turn on turn off lights to simulate if we went on vacation one day to
visit a relative because we can turn on the lamps in the room that
light up for a while to pretend that there is human presence this is for
security issue so to speak truth or I don't know something other situation than
can provide some security and that can turn on turn off lights or secure
an alarm goes off is not true are
and you may have some ideas also then we will use the timers
in this case we are going to start use the timer a delay which is the timer to
connection and it's the timer that delays the time to turn this timer on then
which is here then I will leave it out here and how are we going to use
our the time is good here the start is going to be the same we have to be
in our memory of unemployment and the difference because it will start here in
this case here in this case we are going to observe
that the lamps are going to turn on after a while then
means that here we are going to set the timer the timer should receive a boost on
place or connection point where gets a boost it's in this one that's
here this one here is the signal to send to pay here also simulates the
time to be dilated then we make the connection here so that the
memory this memory commands to turn on the timer
sorry we have to give twice two East
and when we are here it takes two click we are on this platform we are going
to send here we have two options parameters and the comment that we
we want to do it for example here you we can put this I don't know if it was a
company because this is the filling timer from base to base again I don't know that many
places in a company that can put like this and this can be
locate here I do not really know and many ways here you can change the color
they can you won't be doing so many things I'm here or I just don't
they give or don't put anything they leave it like this here block you can also put if
you want if you have multiple blocks it's filled one filled two filled
three or the break time actually because this one here could
bottling a possible if you guys want to see this is going to do it like that
bottled way 1
and here then we are going to observe you are here this label is going to
put on the timer here in the part superior then in the same way
You can really leave it if you they want nothing and for me there is no
no problem about I'm teaching you use for time setting
we must take into account this window we are going to zoom this window
for us to look here at this window we have 22 little window and one
reference in this case if we we click on the reference we
we put hours and minutes means that this number will represent the time
and this one here will represent us minutes if we leave them in minutes and
seconds this number will then represent us
the minutes and this one here will represent the seconds that way
we can work it and as in simulation we work in short times what
we leave in second then this one doesn't represents the seconds and this one does not
represent the thousandths of a second so if I want this to be delayed
2.5 seconds then the 2 will be here and here i can type or go true number
number up and down ascending or doing
I can only type with the arrow directly from my numeric keypad
having done this we will accept it and as we can see here in the part
if we do a here we go to observe that the time has been set
timer trigger then having done that now we are going to locate
our lamps means that we are going to search for a normally open contact
we will put it here this contact is not an entry and one and two and three or nothing
but it will belong to the timer or we look for it one by one around here if you
so requires that it's on the timer or well when we are here start we can
put the letter t immediately on search engine helps us find the timers
that we have as we only have one because then it's just going to associate that timer
we are using it in programming then we come here
here we have our first our first lamp and here we will have the
second lamp and this timer is the one He is going to send me to light the three
lamps then having said this let's make a number a small
simulation we go to simulation we appears here as we can see
right now our elements to this ignition
and well here we have a small error what I will disconnect we will disconnect
because it turns out that we our buttons we have them well we have it
as a switch as we have created new then here we are
using as buttons then we are going to compose let's repair this little
error and now we are going to go to simulation then we come here we simulate
after time energizes your contact associate is energized and sends action
the lamp here it goes out
if we do it at the bottom equal is going to happen and two remember that there are two
It is turned on, so then I press and two the mark is on the timer
is counting when I finish counting the timer is when it commands to turn on the
lamp this time we go we can change example if you wanted 6.3 seconds
I can put it here and the precision is much older and well let's do a
simulation we press on we wait for the timer to finish counting
the time and it will be sent to light the lamps like you we
we can see here what we are going to pay we are going to zoom the timer on this
area where is high and mary the lamps let's turn it on and let's see the
countdown that the timer does when he finishes counting
regressive is ascending when it ends make the count because it sends to light your
lamp in the case of these of this timer is not like in the suite without
be in descending order because here are in ascending order this is in
ascending order until time is reached that we have configured and prefixed
on the element when the time comes Well, it does its job
its function is to close this contact when the
time that we have configured in the ok item with nothing more to say
Well, I think that this is how this little scheme would be working
this is how the timer works a delay to as we have been studying here
we say and also the public without it we were doing some simulations
with nothing else and what reference is I dismiss all of you as always
wishing you well and subscribing to our youtube channel