[ALARM GRID SOUND BRAND]
Hi, DYI'ers.
This is Michael from Alarm Grid.
And today, I'm going to show you how
to pair your Yale Z-Wave lock with your Honeywell Lyric
Controller.
Now, the Honeywell Lyric has a built-in Z-Wave controller,
so it can pretty much add almost any Z-Wave device to it.
Z-Wave is generally universal, so you
should have no problem pairing the lock with your Lyric
controller.
Now when you first set up the lock,
you'll be asked to set up a master pin.
So we're going to be using that as part of the process.
To keep it simple, we set ours to 1234.
Yours might be different.
Probably it's different, but in our case, we have 1234.
So we're going to start on the Lyric.
We're going to put it into its inclusion mode.
By the way, the lock is smart.
You don't really need to do an exclusion process here.
You can if you're experiencing trouble.
You might also consider defaulting a lock.
We have separate videos on excluding
the lock and defaulting lock, but we're just
going to go through the inclusion process here today.
And we're just going to go to Automation here,
and then we're going to press the down arrow.
And we're going to go to Tools, and we're
going to go to Include Devices.
And that's putting the Lyric into its inclusion mode,
but we also need to put the lock into its inclusion mode.
So now that we have our Lyric Controller
into its Z-Wave inclusion mode.
We're going to access the Z-Wave inclusion
mode on our Yale Z-Wave lock.
So we're going to tap the keypad a few times,
and it will appear.
And there it is, so we're going to enter
in our master pin, 1234.
And then we're going to press this gear
icon in the bottom right.
Menu mode.
Enter number.
And now it's in--
Press the gear key to continue.
It's in Menu mode.
And in this case, we want to press 7.
Wireless Module Setting mode.
Press the gear key to continue.
And then we press the gear key again to continue.
Join the wireless network.
And 1 means that it wants to pair.
We're going to just press 1 here.
Join the wireless network.
And so it's ready to go.
We're waiting for the Lyric to do its thing.
We're going to restart the process there.
It's in inclusion mode.
We're going to press the gear icon on this,
and it should be pairing.
And the device was found on the Lyric Controller,
so it has been paired.
We're going to press Done, and you see, it says Yale Lock.
Apparently, it got assigned to node number 9.
And were successful here, so we're going to go back.
So one issue that you might run into-- if you're
trying to exclude the lock but the lock isn't paired
with a network yet, then you will find that you
won't be able to exclude it.
This lock is smart, and it knows whether or not
it's paired with the network.
So if it's not paired with a network
and you're trying to exclude it, then it won't work.
And I'm going to demonstrate that right here.
This is not paired with a network right now,
and we're going to enter in the master pin, 1234.
And then we'll press the gear icon.
Menu mode.
Enter number.
And then we enter--
Press the gear key to continue.
We enter 7 to do Z-Wave Settings.
Wireless Module Setting mode.
And then-- Press the gear key to continue.
--we press the gear key.
Join the wireless network.
And you see that 1 showed up, meaning that it's
trying to pair with a network.
We can't exclude it because it's not paired with the network.
So if you're trying to exclude the lock
and it's not paired with a network,
you're going to see the 1, and you're
going to run into problems.
And so it's going to take a minute or two for the lock
to sync in fully, but once it does,
you'll be able to control it from the Panel.
And also, if the system is monitored
and you have access to Total Connect 2.0,
then you'll be able to control it remotely from that platform
as well.
That's great for controlling the lock on your phone or a web
browser, and you'll be able to include it with Smart Scenes.
So that's how you pair your Yale Z-Wave lock with your Lyric
Controller.
If you did like this video, if you found it helpful,
please give it a thumbs up below.
And remember to subscribe to our channel for updates
on future videos.
And if you ever need any help, please email us
at support@alarmgrid.com.
Hope you enjoyed the video.
Thanks.