The DLP chip is located within the light engine or optical engine. To be best prepared to
replace the DLP chip inside of your TV, you will need the following materials, a pair
of latex gloves, your shopjimmy.com DLP replacement chip, a pair of needle nose pliers, both a
flat-head and philips screwdriver and a cup to hold all screws, clips and other other
small items. So, let's get to it, shall we?
Be sure to unplug your TV before starting any repairs.
Unscrew and remove the bottom panel from the back of your TV. Remove all cables from the
light engine, take care not to use excessive force when removing cables. Exact locations
of cables will vary depending on TV. Remove the screws holding the light engine
in place. Carefully remove the light engine from the TV. Remove the lens shroud by removing
the corresponding screws. Take care not to touch
the lens. Remove all cables
from the DMD Board. Remove the DMD Board housing screws. Remove
the back half of the DMD board housing from the bottom. Remove the DMD board screws. Make
sure to support the board as you remove the final screws. Remove the DMD board from the light engine. Release the DLP chip heatsink
by removing the corresponding screws. Remove the heat sink. Remove any remaining DMD board
screws. Remove the DMD board from the front housing. Unlock and remove the DLP chip from
the DMD board. Thank you for watching one of our many tutorials
here at ShopJimmy.com.
We strive to learn and share new TV repair
tips everyday. Subscribe to our YouTube channel and grow with us, share our videos with your
friends and help us spread the savings, and don't forget to hit that like button.