TV Repair Made Easy: The highest quality, lowest priced TV parts and a mission to make
you happy!
RCA/Westinghouse HV320WXC1007061 T-Con Boards Replacement Guide for LCD TV Repair
Welcome to TV Repair Made Easy, brought to you by ShopJimmy.com.
Visit www.shopjimmy.com to search the hundreds of thousands of TV parts in our inventory.
WARNING! Please make sure that your TV is unplugged,
and that you are protected from static electricity. There are various ways to eliminate static
wrist strap. Take photos and notes often to help remember
To be best prepared to replace the T-Con Board inside of your TV, you will need the following To be best prepared to replace the T-Con Board inside of your TV, you will need the following
Your ShopJimmy.com replacement T-Con Board. A pair of needle-nose pliers.
Both a flat-head and phillips screwdriver. And a cup to hold all screws, clips, and any
other small items. So let's get to it shall we?
Locate your TVs identification label and take note of the brand name model number, serial
number and model code if present. Unscrew and remove the back cover.
The Timing Control, or T-Con Board is a part of your TV's LCD Panel Assembly.
It is connected to the Main Board via the LVDS Cable, and to the LCD Panel via flat
ribbon cables. The T-Con Board is centered on the top edge
of the back of the Panel and can be hidden under a metal or plastic cover.
This board is mounted to the back of the display panel, and requires removing a top layer of
the chassis. Carefully unplug all wires by hand.
Unlock the wire connectors by squeezing the tab or tabs and gently remove the wires. Be
sure to keep a firm grip with both hands. Unscrew and remove the cover for your part.
Loosen main board from chassis. Loosen and slide the metal plate down on the
chassis. Disconnect the LVDS cable from the T-Con Board.
Please note that the LVDS cable is quite fragile. Two hands may be required to release and remove
the connector. Unscrew and remove the cover for your part.
Carefully unplug the ribbon cable by hand. Using your finger flip up the tab on the ribbon
connector and gently remove the ribbon. Please do not use a screw driver to open ribbon
connectors as it can cause damage to the pins. Remove your bad T-Con Board.
The part number for this item can be found printed on a barcode label.
Search your part number on http://www.shopjimmy.com to find a compatible replacement.
Click on the search results to view important product specifications.
Verify that your original board matches all requirements noted in the product description
prior to purchase. Place your ShopJimmy New T-Con Board onto
the chassis. Reconnect the ribbon cable.
Gently guide the ribbon back into the connector, match the line printed on the ribbon cable
with the edge of the connector, and close the tab on the top.
Insert all screws to secure the cover for your part.
Connect the LVDS cable to the T-Con Board. Reinstall the metal plate.
Reinstall the main board. Insert all screws to secure the cover for
your part. Reconnect all cables.
Return the back cover to its original position and secure all screws.
This ShopJimmy replacement T-Con Board does not require any manual configurations in order
to function. Simply plug in and power on and your TV will
function as if new.
Thank you for watching one of many tutorials here at ShopJimmy.com!
We strive to learn and share new TV Repair Tips everyday.
Subscribe to our YouTube Channel and grow with us!
Share our videos with your friends, and help us spread the savings!
And don't forget to hit that Like button!
Picture High Contrast Colors