friends, a huge hello to everyone, you are on the channel to do it yourself with you again Alexey and today we will talk about
sharpening drills, I think where they collided when and drills they get blunt and carry them in your mind and sharpen
, including I saw a device there now I will try to make it for sharpening drills to do
for 5 minutes, so we all have a pleasant viewing, but we’ll start making a device from
such a bar, it’s a glued plywood headlight 1515, it turned out 30 and I have a width of 50
above me, cut off a piece of 80 millimeters, find the markings to do and immediately on the search
, we’ll make the size like this, we need now will cut it off
, it turned out to be such a triangle, in theory here 116 degrees, now
we are also marking in the center and with a file now we are making a recess
, so we get a recess, we have such a bar
50 by 80 I will use a grinder for sharpening, maybe a radical grindstone
I will need to try on it we take our adaptation of glasses, we put triangles,
and we all know what the angle is. remaining at up to 120 degrees, we look that the drill is not yet accurate, I’m
just generally kicking him and we’re trying the process now, we’ll set it not to fill our hands
, so we’ll look at the drill itself, that is, do this shop for us too, and then a little later I’ll show
how it’s why it’s done below the edges are littered and we’ll try the tomatoes ourselves, it’s interesting, it turned out no,
I clamped the clamps so that the metal is not kofanova and it doesn’t hit my hands
with soft cheese, this is not the best option to show now we’ll try to grind off another one,
we’ll figure it out in more detail on sharpening, also let’s try, but what’s the eight drill for sure
we expose in the same way, but it will be even better to keep it when we sharpen
the corner faster, when we turn like this, we make the butt and the bench so that the lower part of the back is
lower cutting how to explain correctly, I don’t know, yes, I’ll just show how to do it in theories
, and we also try hastily about the fact that you yourself never,
as you see, everything is clear
there, that is, it has the right place so manually not from it would have bloomed because I had no experience and now I have
trained 6 you can fill your hand with such a device still a
dozen milans here [ __ ] linda edge we will try to put it in order good drill was but
also clearly visible in the heading
now we will try it
as a unity clearly friends can be traced, that is, this thing really working remembers ten by
80 and you can really drag it in, and right before your eyes with 3 drills it sharpened which I wanted to pull out because
they don’t know how to give it to someone very much that tourists will now be dragged xan
if you liked this one be sure to put the video on the like write your opinion
what do you think about this I don’t teach someone what it is necessary to do this
yes I just showed it as an option I don’t know how I didn’t think that with such a
device I would fill my hand and I would keep a constant angle and it will be
easy to do it yourself, but if you don’t know how to, you can always do something like this and, by
your own example, friends showed you on as always, thank you so much for watching me
for supporting me, of course, I’m waiting for feedback from you, what are you doing to adapt how you can
improve something to add, I’m definitely waiting in the comments, so you all have a good
mood, the most important thing is health and health again until we meet again till