Hey everyone! I'm going to show you how to make double sliding doors for today's LEGO brick
tutorial. Let's begin the tutorial with a 16 by 32 stud base plate. You can use any size you wish,
and on the middle-left, let's set down a pair of 1 by 6 plates. Next let's set down
four 2 by 4 flat tiles. These are going to be used to
smooth underneath the door, and to keep the door onto the base. Now i want to continue on with
a pair of 1 by 6 plates in these two areas a set of 1 by 2 by 2 corner flat tiles and
two 1 by 1 by two thirds slopes you want the slopes facing
upwards the reason being is these are going to be the stops for the bottom portion of our
track and we're going to smooth tile these two areas with a pair of 2x4 flat tiles
now i want to build up the bottom portion of my windows so i'm going to set down four
1 by 6 plates on the previous 1 by 6 plates
take eight 1 by 4 by 6 frames i'm going to set a piece of glass inside the frames
and i want to set these right here we're going to make eight in total
i'm going to take six of our window assemblies place three on the left and three on the right
you can use anything for your walls i decided just to go with with a window facade now i want to take
a pair of 1 by 2 by 2 corner plates i'm going to place the corner plates in like so to wear
the two stud portions on the inside those are going to be our stops and a set of
1 by 10 plates to lock together all our windows
next place a set of 1 by 8 plates on both left and right hand sides right on top of the 1 by 2 by 2
corner plates for our door start with the 1 by 4 by 6 frame with glass insert i'm going to set down
a 1 by 2 and 1 by 3 plates on the bottom and for the top a 1 by 10 plate set down a 1 by
2 flat tile on the left hand side we're going to set this on the top this is going to be our left
handed door now for the right door take a 1 by 4 by 6 frame with glass insert we're going to set
a 1 by 2 and 1 by 3 plates on the bottom and for the top portion take a 1 by 10
plate let's set down a 1 by 2 flat tile on the right hand side i want to set this on this portion
of our frame let's set in our left-handed door and our right-handed door now let's build our header
for the top track take a 2 by 8 modified plate with track i'm going to set down a one bait flat
tile on the right hand side and we're going to slip in another 2x8 plate with track and set down
two 1 by 6 flat tiles on both sides of the 1 by 8 flat tile now i want to flip this
over i want to strengthen up the underside of our frame and track with a 1 by 8 plate
setting in our header is pretty simple i'm going to put the 1 by 8 plate
right inside the opening and we're just going to press all this down make sure your doors
are inside this track piece and i want to finish this up with a pair of 1 by 6 flat tiles
the top portion and there's our double sliding doors you open up
even the inside is all nice and clean
the only obstructions you have are these two slopes here other than that though you could
set some nice merchandise in there that's how they work on the inside and if you want to open
up one at a time the stops for the tiles will prevent these from going in further