Hi everyone, Welcome back to geardo,
Today we will show you how to replace the charging
port board on Xiaomi Redmi Note 10 5g Mobile phone.
To start, we need to have the right tools to proceed with the repair,
which You can find in the description.
First, turn off the phone and follow the back cover removal.
To remove the back cover, it needs to heat gently
around the rear cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad.
Place the back cover side on the heating pad and Select the mobile phone HEATING option and leave
it till it completes. Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Take out the back cover and take out the Camera Lens frame by undoing screws.
Undo four screws, lift the camera lens cover using a pry tool.
Next, take out the sim tray and disconnect the fingerprint plug.
Next, take out the midframe by undoing 13 screws from the top and bottom sections.
And then, Using a plastic card pry tool, create an opening to separate the back cover frame.
Be gentle and workaround on the edges to disengage the plastic clips.
Take out the mid-frame and And then disconnect the battery plug.
Next, move to the bottom and remove the speaker cover from the body.
Next, remove the not-working charging port board by disconnecting both antenna heads and LCD plug.
Next, place the new charging port board in the body. And
then secure both antenna heads and secondary lcd plug into the board.
Next, place the speaker cover.
Next, secure the battery plug.
Next, secure the mid-frame by adding 13 screws and the sim tray. And also,
make sure to connect the fingerprint plug.
Next, place the camera lens frame by adding four screws.
Before installing the main back cover, make sure it has enough glue on it;
if not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding bonding clips to tighten the rear cover with the body.
If not, you can use some rubber bands and Leave them for some time.
I
hope you have enjoyed the replacement guide.
Let us know if you have any questions. Please, like, share, and comment on our videos.
DO not forget to hit the subscribe button.