Hi everyone, Welcome back to geardo,
Today we will show you how to replace the LCD screen display on Oneplus Nord N200 5g
mobile phone.
To start, we need to have the right tools to proceed with the repair, which You can
find in the description.
First, turn off the phone and follows with the back cover removal.
For removing the back cover, it needs to heat gently around the rear cover edges until the
pasted adhesive becomes soft.
For this, we are using a heating pad.
Place the back cover side on the heating pad and Select the mobile phone HEATING option
and leave it till it completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed, Use a suction cup to create an opening between the frame
and rear cover.
Next, insert a plastic card pry tool or something similar to cut the adhesive around the back
cover.
Take out the back cover, and Next, Take out the midframe by undoing seventeen screws from
the top and bottom.
And then, Using a plastic card pry tool, create an opening to separate the back cover frame.
Be gentle and workaround on the edges to disengage the plastic clips.
Make sure the sim tray is out.
Next, disconnect the battery plug and then disconnect the fingerprint plug to release
the midframe from the body.
Next, take out the battery; first, loosen the adhesives on the sides and pull it by
the red tab.
Be gentle and lift the battery.
Next, take out the speaker cover by undoing two screws.
Next, disconnect the main flex and two antenna heads from the charging port board.
Next, gently pull out the charging port board from the body.
Next, apply heat and pull out the vibrator motor from the body.
Next, disconnect the main flex, lcd plug, and main camera connector from the logic board.
Next, lift the logic board using a tweezer or something similar.
While lifting, Free the adhesive strip near the volume flex, it helps to release antenna
cables from the body.
Next, pull out the volume flex using a tweezer.
Next, take out the primary camera.
Next, take out the power flex from the frame.
Always pay attention to adhesive strips on
the frame.
Next, apply heat and pull out the earpiece from the body.
Next, move the battery protective tape to the right-hand side.
Next, pull out the main flex from the body by moving the adhesive strip.
The only remaining part is the broken front screen assembly with the frame.
For the replacement, there are two different screen types in the market.
The one is with the frame, and the other is without the frame.
It can be original, used, or aftermarket.
Either version you choose, you can get with the frame and without.
But the most straightforward repair will be with the frame, and also, the price difference
is not that big.
I recommend you go with a screen with the frame installed.
It can be original, refurbished, used, or aftermarket.
And this type is commonly available to purchase.
Next, on the new screen frame, start placing removed parts.
First, place the power flex.
Next, place the earpiece module.
Next, secure the volume flex.
Next, place and secure the logic board.
Next, secure and connect the primary camera on the logic board.
NExt, place and secure the antennas on the frame and then paste
the adhesives back.
Next, place the vibrator motor on the frame.
Next, secure the charging port board.
Next, secure both antenna heads to the charging board.
Next, place and securethe main flex on the body and then paste the adhesive strip back.
Next, secure the speaker cover by adding two screws.
Next, place the battery in the body and secure the adhesive.
Next, secure the fingerprint and battery plugs to the board.
Next, place and secure the midframe by adding seventeen screws.
Ensure the clips have fastened before inserting screws, and also insert the sim tray.
Next, Before closing the device, it is good to verify the functionality by powering up
the device.
Next, Before installing the main back cover, make sure it has enough glue; if not, use
B7000 glue or a new double-sided back cover adhesive.
Finally, we are adding binding clips to tighten the rear cover with the body.
If not, you can use some rubber bands and Leave them for some time.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions; please like, share, and comment on our videos.
DO not forget to hit the subscribe button.