friends a huge hello today we will work with the remnants of polystyrene foam, we will try to
experiment with a solvent with acetone, we will make from it what substance we will work on
melting, so in everything a pleasant viewing, let’s go, I think it will be interesting,
but today we will work with six hundred and forty-sixth solvent and with acetone we will take two practically identical
short pieces like this, let's see which of them eats up our polystyrene foam faster
and then we will further dilute it and see what we get out of it
now just omit these 2 identical pieces there is no installation here how to lead the reaction immediately went
let's already melt and we see that acetone copes better in this situation, the solvent is worse
and for some reason has already stopped melting, as if it was saturated, and listen to everything, it doesn’t melt at all more
in short, we will probably work only with acetone, we set this piece so that it dissolves further, but
you see here we have sediment there is no truth, it turns out one the native liquid is such a
true foam from the reaction, and so there is no sediment, acetone eats well, but there is sediment
now with you we will finish acetone to one fraction so
that we have the same substance and try to use it, that is, you see
, so far there is practically no reaction here such a weak, weak
, in general, solvent, let it melt this piece for now, we’ll try to add a little
acetone, you already see a thick mass has become, but the liquid is still floating on top, we’ll make
some super glue with you, we’ll also add a little to the fact that there is still
such a mushy liquid, we’ve already got
it there is no sediment anymore, a homogeneous mass, the solvent finally
melted our piece, well, even a small, small one floats and it turned out such
a pink-colored orange liquid, probably more bright orange, but I
think there will also be a good protective coating now we will try a
solvent on a small piece of foam block 646, you also see outlined, also this I’ll take an hour straight to pour
it, let it soak it into concrete so that tomorrow we can understand what it will be
like, I think everyone will be interested in it will be so liquid if watered again, it can be watered with a
brush to paint some because all the same, the foam plastic is not afraid of ultraviolet foam
they are so afraid of ultraviolet radiation, I think one layer is enough and right in one place now we’ll smear a little
that the glue remains in us now we’ll rub it well lead it starts to dry it starts to stretch
in the same mass it dries for a long time but when it starts to dry quickly in the open air well so let's also
leave also signed a piece of wood with acetone and 646 solvent also directly from above a little bit
of water soak our wood, we will also leave it until tomorrow and tomorrow I will show you the result, I think
it will be interesting to apply our solution with acetone, it is better applied to the tree right away, I say
everything is applied the same way dry and see tomorrow I'll try pouring xylene let's try
if he eats penoplex himself I wonder well there is also a reaction, well, it’s weak, I press it, you can still
see it eats up a little very slowly, that is, acetone is many times better, straight slowly slowly, but it
turns out such an orange orange homogeneous mixture, so I don’t know which is better tomorrow we will check
in short xylene is worse than the solvent dissolves we put it aside, that is, there is nothing interesting here
now I’ll try to glue two pieces of wood with this solution with acetone and glue it like this
and leave it to dry too we try absolutely smooth plastic we don’t degrease anything just as it
is you can see how bad it is to apply on plastic it behaves very badly smooth the surface is absolutely
we will not deviate from our ideas, we’ll try anyway, I won’t
show it behind the scenes there to deceive as it is, so it’s badly applied to
plastic, well, what are we going to try to glue here now, let’s try to glue polystyrene foam to the
world with you what will happen like this here I smeared life and now I’m sure
we’ll just leave it to dry and see what will happen with this composition try to glue
the foam plastic ordinary extruded usually simple let's see what will happen
, we leave this hill, I'm very interested if you pour the liquid that we diluted
in the solvent turns out onto polystyrene foam and glue it together like this, put
it like this, leave it until tomorrow right in front of your eyes, stupid places then we saw how
it all is, that is, all of our subjects do not take it anywhere, so our friends have passed
12 hours, as you remember, we glued it together with different feelings, it was just a solvent for us,
but you will see, I just saw the penoplex, that is, it does not glue the foam there, we spent a distance
in acetone teraflex but this bread but also eats with stevie that the foam will not
be flat, although the foam cover met the request to give it not because of the place but
ate it inside, that is, it’s also not good for the projection on the patch, here is our plastic, since
now try to listen to it a second but plastic good to do between the plastic glued well
i.e. here burn it cut through
good glues guys
, as you have to break the plastic so that it goes in, the glue gets a good
color for the plastic, it can even be decorated than with a piece of wood with your hands and it turns out to be torn, and
as you can see, with a piece of wood it came off, that is, the wood comes off with fibers for the tree
, too, the glue is good for tearing with a knife, only well and here we got it, here we covered the
trees with you, here it turned out such a smooth surface precisely with acetone, which here
acetone had broken us down Hade 646, the solvent is also so smooth, but not very
shiny, it’s very shiny, just wondering how it itself adhesion, in principle, it turns out
good for you cut off with a knife with a knife, we need to try to pour a little, we wind it and see, that is,
you see, yes, the water does not absorb a slightly diluted solution, but the water does not absorb, that is, we see
that we have a piece of wood that is dry here, the same thing, I understand that water will also not
be absorbed if, let's say here here we have a little bit of us about to the tree, but here everything is dry
here let’s see what happened to us spin in a block, we see, I just left, that is, with such a
porous material as you, it doesn’t work on the block and it’s as fragile as you can see, it’s on acetone, but
on the solvent he saw a straight film, I think there will also be no plan soak in, but you can see
everything is dry, the water has not been absorbed, it is on the surface
, here we pour it like it’s not some water, we immediately see it soaked
in, here it just gathers on top and
how protection such a coating can be covered, so we draw conclusions to cover Palestine blocks
what can be a creator of a diluted wall polystyrene foam, but not like that, instead of
stroke colors, you yourself saw it, of course, there was a surface to clean up there, I primed it, I didn’t
pursue it, I had to show how it would be in a real situation, act to work again
, I repeat my friends to the tree, the adhesion is good, but the porous material is not very solvent 646 also
showed itself well as impregnation, and protective impregnation should be tried by the way for combustibility
, it will somehow burn, well, like an ordinary tree, like resin, it all burns like it doesn’t support combustion
, what
level and we continue
the means so you see, yes, it doesn’t support combustion,
as it were, it’s caught, it’s charred, well, they wanted the temperature to be high, but nevertheless
, even when it’s heated, where warmed up, it’s necessary to cut the product together
friends, we got such a release, I was just wondering how it works everything
about you with polystyrene foam, you yourself saw what stuck together, what not to glue, because your mother gets it as she
can, you might be interested in something else to try what to glue
what do not stick together in sure write in the comments try to repeat if you
liked this video be sure to thumbs up be sure to write your opinion I
wish you all good health everything all the fat is good until we meet again bye bye